March 15th, 2005, 02:46 AM
brace height is 3\16in. under. problem is when i twist up on the cable it bunchs up at the yoke. do you twist the cable in the opposite direction where the strands splits or do you twist the strands in the opposite?any info apprecited. :smile:
March 15th, 2005, 08:40 AM
They say to twist the 2 yoke cables oppisite the string to help counter the yoke twisting, but if your cable is as bad as mine was you will end up with 4 or 5 twist in it to get it in spec. Mine actuallty shot fine this way, adjust for Bh,cam rotation,and check yoke for cam lean.
March 15th, 2005, 11:04 AM
You should twist the cable or string according to how the servings were put on. If you decide to twist them the opposite way, you will end up with serving separation due to the twists untwisting the servings!