PDA

View Full Version : Bowtech guru's



EricO
March 16th, 2005, 11:54 AM
I think I bought my Allegiance a little short(28.5). Just out of curiosity what does it cost to have the cams replaced with 29" ones? Also do I need a new string?

Jhorne
March 16th, 2005, 12:05 PM
Try taking the rubber bumper off the draw stop. It will give you about a 1/4" which may be enough. It also gives you a real solid wall. It helped me a lot. John

Techy
March 16th, 2005, 12:23 PM
Cams run about $50 I believe

Service, well depends :)

EricO
March 16th, 2005, 12:23 PM
I'll try that.

drjr
March 16th, 2005, 12:23 PM
But if you do get new cams you do not need a new string or cables.

EricO
March 16th, 2005, 12:29 PM
But if you do get new cams you do not need a new string or cables.

That's goood news.

Olink
March 16th, 2005, 07:48 PM
Other suggestions - if you use a wrist strap release, try one with the trigger set further back. If your string loop isn't overly long, you could make it a little bit longer. You could also take off the stock grip and shoot off the riser. That would give you a little extra length, too.