PDA

View Full Version : Difference when adjusting limbbolt when maxing out poundage



Jason Shore
March 19th, 2005, 11:12 PM
Before I started working on my Razortec I marked the limbbolts with a white marker so I could return the poundage settings to before the work settings.The limbs were maxed out and limb pocket was touching the riser.
I turned the limb bolts out five complete turns and completed the work.After Re-adjusting the limbbolts the five turns I found out that the top limb bolt had to be adjusted a further 1/4 turn to max it out.The bottom was spot on with the mark on the firth turn!
When I was adjusting the top bolt the extra I paid carefull attention to the cap between the limb pocket and the riser to make sure I did not over-tighten the limb bolt .
Has anybody ever found or experienced this before???
Thanks Jason

Ian
March 19th, 2005, 11:36 PM
Guess you weren't maxed out on top as you said before you turned it out. Draw weight shouldn't change once the pocket is bottomed.