PDA

View Full Version : Help with Bow Madness XS



pcds_146
December 17th, 2012, 01:21 PM
:angry:
28" 65lbs Having to shoot nock point about 3/4" above square to get it to paper tune. Is this normal ? Shooting a QAD drop away rest. Arrow is a such a downward angle that broadhead almost hits the riser shelf

NYSBowman
December 17th, 2012, 01:27 PM
Def NOT normal for nock to sit so high. Square to 1/8th high would be my guess to where it should be.

Make sure your cam timing is correct then I would check for vane interference.

Archery dynamic
December 17th, 2012, 03:15 PM
there is a "timing" or alignment mark on those qad's that needs to line up when you are at full draw if that is lined up I would say check your timing on the bow itself

pcds_146
December 17th, 2012, 05:48 PM
there is a "timing" or alignment mark on those qad's that needs to line up when you are at full draw if that is lined up I would say check your timing on the bow itself

New to one cam bows, how do you check or adjust the timing on a single cam bow