PDA

View Full Version : L6 cam question on 2010 vendetta xl



Henge
January 8th, 2013, 10:44 PM
http://www.archerytalk.com/vb/attachment.php?attachmentid=15 53763&d=1356679212

got this bow used. Is there supposed to be a silver peice of metal between the two bolts below "a" and "d" that adjust dl on cam?

ccriley6
January 8th, 2013, 11:02 PM
Yes.....There is a silver piece that shouldve came with it....Pimp my Bow used to make modlockers for L6 and Axe cam both...but no longer make them... In 2011 PSE fixed the slippage problem...making the 2011 cams more desirable.

Henge
January 8th, 2013, 11:13 PM
So do I need that silver piece? any idea where I can get it?

redhookred1
January 8th, 2013, 11:17 PM
Call PSE, they will hook you up, your local PSE dealer may have the right in there shop.

ccriley6
January 8th, 2013, 11:20 PM
So do I need that silver piece? any idea where I can get it?

Yes......Local PSE PRO Shop...I would see about getting 2011 cams for it if it was mine

Henge
January 8th, 2013, 11:24 PM
When u say slippage do u mean dl will slide. Do mod lockers eliminate this? If my dl is 32 do I need to worry about slippage?

ccriley6
January 9th, 2013, 05:20 PM
The module was bad about sliding on the 2010 vendetta and axe.....bc of the way its designed. The bow did come with a small silver piece on the bottom cam that the 2 mod screws went through and fit down in the groove on the cam.

ccriley6
January 9th, 2013, 05:24 PM
1563286


This is on my 2011 bowmadness but is similar to the one that came on your vendetta. Hope that helps ya. Mod lockers do solve the problem, but are no longer available. PMB used to make them but no longer does and they are hard to find. The mod locker is a longer version of the small silver piece that fits in the whole slot on the cam and has multiple holes.

Henge
January 9th, 2013, 06:55 PM
I realy appreciate the feedback. Now I just gotta find it...

ccriley6
January 9th, 2013, 08:29 PM
No problem......If ya cant find one locally, send me a pm and i can pick ya one up at my local PSE Pro shop and send it to ya

Seabee99
January 12th, 2013, 05:10 AM
I'm not sure if all dealers will do this, but my dealer replaced the 2010 cams with 2011 cams free of charge on my 2010 Axe 7...