June 7th, 2014, 02:11 PM
I got my son a nuclear ice when he was six. He is now eight and the draw length is way too short. I was going to adjust the draw length and noticed that the cable did not line up with any of the timing dots. It is closest to the '1' dot. The manual does not provide any information on the timing dots. He is currently on the 'B' module settings and the number for draw length is '5'; I want to move it to '2'. Any input would be appreciated. Thanks.
August 17th, 2014, 12:22 PM
As long as the timing marks are the same on each both sides it's considered to be in time. You can tell easy by drawing and feeling if the wall hits the string on both sides at the same time.
August 19th, 2014, 12:04 AM
Thanks. Bought my daughter the same bow. Got her some pink limbs on EBAY. There is no bow press that is short enough to press this bow. I had to make one out of paracord and two turn buckles.
August 19th, 2014, 09:05 PM
I just turn it all the way down and compress it in my lap, then make my changes... lol