OzCrest Custom Wraps

[CoppertoneSPF15]

Here's a variation on the Phoenix design I'm working on for a custom job request. Lots of white in there for a brighter wrap. :)

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/rogbo-PR-Grn.jpg

[Bowhunter215]

Have a safe weekend everyone, I am headed out in the morning and won't be back until Sunday night. gonna try and get some blood on my nice white wraps. Take care

-Jared

[CoppertoneSPF15]

Hope you tag some good eatin, happy hunting and good luck Jared! :)

[ddetar00]

:bump:

[ddetar00]

Where is everybody at this weekend... Muzzle Loading???:rolleyes:
Anyway... back to the front

[Bowhunter215]

I'm back, got a doe Saturday morning... I wanted to get blood on these wraps....but I wasn't able to manage.... Check out my story and the picture here
http://archerytalk.com/vb/showthread.php?t=571673

[CoppertoneSPF15]

I'm back, got a doe Saturday morning... I wanted to get blood on these wraps....but I wasn't able to manage.... Check out my story and the picture here
http://archerytalk.com/vb/showthread.php?t=571673


Nice doe Jared, congrats! :D

[CoppertoneSPF15]

All orders placed as of the week ending Oct.13 are in the pipes! :)

[Bnbfishin]

in regards to the orange wraps on post 740.

[CoppertoneSPF15]

Remake of an oldy, Angel In Lighting.

Bolder, more vibrant colors, lightning end bars, and a smoother transition on the Angel glow flare.

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/ArchangelFinalsampler.jpg

[CoppertoneSPF15]

Logo lightshow with some added SPICE!! :wink:

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/Logolightshownew.jpg

[Bowhunter215]

Now those are SAWEEET!!! Check your pm's when you get a chance phil.


TTt for the night guys.

[rogbo]

Holy toldedo. I just can't understand why anyone else is bothering making wraps. You guys are so far ahead of the curve it's ridiculous.

[ozhuntsman]

Hey Hey ! Great work Phil , I will upload all the new stuff to the website over the weekend mate. :wink:

Here is the last to the CRUNCH series, This is Crunch OUTBACK. We have been held up which is to be expected I suppose :mad: These things do take time to get into production but a little progress is made each day, and we WILL get there soon.
http://i19.photobucket.com/albums/b185/redlettersinger/cam2.jpg


Our shipment of VICTORY arrows has landed and these great arrows will be gracing the shelves here in Australia within the week. The Shooters Shop is stocked already :eek: Archery Shak have their shipment going out in the morning with Alcock and Pierce's order also. The first 500 dozen donated wrap for Breast Cancer Foundation left Australia a couple days ago, bound for VIctory. Here is a pic of the pink arrows.
http://i19.photobucket.com/albums/b185/redlettersinger/P1010013-1.jpg

First shipment of SLING BRAID custom sling should be here in a couple weeks, so watch out for these beauties at all our dealers here.

It has been a big week, thanks again to all our loyal OzCrest customers, the new website is taking some time I know, but just wait a little longer, I promise it will be worth it :wink:

:darkbeer: Cheers to all :darkbeer:

Oz

[ozhuntsman]

I'm back, got a doe Saturday morning... I wanted to get blood on these wraps....but I wasn't able to manage.... Check out my story and the picture here
http://archerytalk.com/vb/showthread.php?t=571673

Top effort mate, :wink: Congrats !!!!!!!!!

[ozhuntsman]

here are a few I threw together for the boys over at TREELIMB PRODUCTS. :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/rod2.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/rod1minicopy.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/rod4minicopy.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/rod3minicopy.jpg

[ozhuntsman]

Hey TEAM !! Here are the approved HOYT designs for you guys and gals to choose from. We do have more in the works, but we will anounce when those are ready, and we will do it in a very BIG way..............hint hint :wink: These designs are currently ONLY AVAILABLE TO OUR STAFF SHOOTERS !! And no you can't get these for your friends either :cry: , TEAM OzCrest staff shooters and TEAM HOYT USA Staff Shooters only, are permitted to promote with these for HOYT. :D

Metallic with polished silver or gold through the logo's
http://i19.photobucket.com/albums/b185/redlettersinger/riptidecopy.jpg
http://i19.photobucket.com/albums/b185/redlettersinger/infernocopy.jpg

Ultimate X with polished gold banding, you can have any of the CRUNCH camo patterns with this one :wink:
http://i19.photobucket.com/albums/b185/redlettersinger/hoytcrunchcopy.jpg


Ultimate X with pearl yellow, and pearl white.
http://i19.photobucket.com/albums/b185/redlettersinger/hatchfinalprint.jpg
http://i19.photobucket.com/albums/b185/redlettersinger/hoytorcwrapcopy.jpg

[ozhuntsman]

Here is a csutom job I did last week. It was a challenge to make a wrap that looks the part, without any colour. Customer is happy, and so am I. :D

http://i19.photobucket.com/albums/b185/redlettersinger/kamcopy.jpg

[Bowhunter215]

Very nice Rich... I might just have to get a hoyt now so I can show those off :tongue:

TTT

[ozhuntsman]

Ok TEAM, I need all your profiles re-sent with only the required info, like the profiles on the current site. I will also need all of you that have taken game this past yr, to provide us with pics and stories for the new website. A new section for bragging and pics from our staff.

NEW !!!!!!
The PUB > is going to be a new section for OzCrest users. Kind of support forum. It will include these sections for starters, and is only for OzCrest users.

BAR (general conversation)
BISTRO (for the jrs)
GRILL (hunting)
THE SHED (target shooters)
and the all new TAKE IT OUTSIDE members only forum (for those odd disagreements) Should be great entertainment. :wink:

Our new dealers have been added to the existing website, so I will email out all your login details over the weekend. We are updating the 2008 pricelist today for all you new dealers.

New design being uploaded this weekend, including all of those fantastic designs from CoppertoneSPF15.

Ok, back to work, later y'all :darkbeer:

[CoppertoneSPF15]

A modified version of Phoenix Rising, for a white background.
Inspired by a custom design request from rogbo :)

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/PhoenixsamplerW.jpg

[CoppertoneSPF15]

And one from our young friend JR. Works great as a standalone or as base design to build up from. This pattern can also be multiplied and/or rotated slightly for a sweet looking carbon composite look.

Graphite
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/Checkers.jpg

[PSEloyal]

I recieved a set of the death from above ultimate X wraps today and I put them on Let me tell these are first rate quality and also some great lookig wraps I can assure you when you order his wraps you wont be dissapointed

[CoppertoneSPF15]

Thanks for the compliments HJ!

We strive for excellence in service and take pride in making superior quality wraps. In the end, happy customers like yourself is exactly what it's all about for us. :)

[Hutnicks]

I'll wait for the magic eye stereogram versions. That way I can clean up while everone's eyes are wigged out from trying to find the picture:)

[Bowhunter215]

Are you talking about something like this :tongue:

Just put this together and I think I will be seeing spots for the rest of my life


Everyone know how this works?


http://i124.photobucket.com/albums/p32/JaredR215/Displayversion.jpg

[ozhuntsman]

I'll wait for the magic eye stereogram versions. That way I can clean up while everone's eyes are wigged out from trying to find the picture:)


hmmmmm ......... and here come the ideas .............. stereo holograms ... might be cool, might also send me blind :eek: Great food for thought , Thanks :darkbeer:

btw your signature quote is very inspiring :)

[Jerry/NJ]

Ok, let's try this again and see if those talented fellas can offer some suttle suggestions to enhance my wrap.....(even tho I like it like it is)......:wink:
Thanx guys !

[Hutnicks]

hmmmmm ......... and here come the ideas .............. stereo holograms ... might be cool, might also send me blind :eek: Great food for thought , Thanks :darkbeer:

btw your signature quote is very inspiring :)

Thanks Oz. Still thinking on the stereogram idea, if you could do a limb cover where the Martin Cat leapt into view the M4L guys would keep you in business all by themselves:)


Have you done any work with the 3M scotchbrite reflective vinyls?

[ozhuntsman]

Thanks Oz. Still thinking on the stereogram idea, if you could do a limb cover where the Martin Cat leapt into view the M4L guys would keep you in business all by themselves:)


Have you done any work with the 3M scotchbrite reflective vinyls?


Yup we have all the colours in stock, and use the reflective a fair bit. The stuff is thicker than regular vinyl, but works well as a single layer. We also have a new product to launch soon, which allows pure reflective designs, with multiple colours, so any design we have , can be made as a full reflective, as of this week. Again they are a little thicker and heavier than our Ultimate X, but worth it. I will have pics later this week, once the materials are ready.

I'll get in touch with the Martin, and get rights to their logo hopefully, then we can start on some of those limb FX with the cat :wink: Hey PHIL, you want to have a go at this one mate ?

Also we have improved our limb FX, and they are now easily removed in one peel, with no need for any scraping or solvents. With the others, the vinyl ages and becomes almost permanent and impossible to remove in one go, and picking at the left pieces, scraping, and solvent rubs, can damage different finishes on bow limbs. The new FX are tougher, and can be peeled off whole and intact, ready for a new design to be applied. Now there is no limit to how many times you can change your limb graphic. They do not smudge, wear or scratch, and are 100% solvent proof. :wink:

[CoppertoneSPF15]

I'll get in touch with the Martin, and get rights to their logo hopefully, then we can start on some of those limb FX with the cat :wink: Hey PHIL, you want to have a go at this one mate ?


I can take care of it :wink:

Just let me know when you get the :thumbs_up from the fellas at Martin. :)

[ozhuntsman]

I can take care of it :wink:

Just let me know when you get the :thumbs_up from the fellas at Martin. :)

will do mate, :darkbeer:

[ozhuntsman]

Here are the new BOWHUNTING DOWN UNDER Magazine Official wraps for this issue . So if your name was one of the lucky four printed this issue, you will be receiving these designs.

Graham Cash's personal wrap
http://i19.photobucket.com/albums/b185/redlettersinger/cash2copy.jpg

BHDU Official
http://i19.photobucket.com/albums/b185/redlettersinger/BhduCashcopy.jpg

OzCrest is a proud sponsor of BowHunting Down Under Magazine, Australia's ONLY All-bowhunting-mag :wink:

[Bowhunter215]

Bump

[ozhuntsman]

Thought I would make a post with all three Crunch Patterns in one place. That way you guys get to see the differences easily. :)

Crunch Capricorn HR
http://i19.photobucket.com/albums/b185/redlettersinger/CrunchCapricorn-1.jpg

Crunch All Season HR
http://i19.photobucket.com/albums/b185/redlettersinger/closeupprc2.jpg

Crunch Outback HR
http://i19.photobucket.com/albums/b185/redlettersinger/cam2-1.jpg

[ozhuntsman]

don't forget that all AT custom orders are to go to CoppertoneSPF15. Just send Phil a pm and he will look after you. :wink:

[CoppertoneSPF15]

Got some new stuff coming soon, keep your eyes peeled fellas!! :eek::wink:

[Jerry/NJ]

Phil.....
Post pics of mine when they're done :darkbeer:

[CoppertoneSPF15]

Phil.....
Post pics of mine when they're done :darkbeer:

Talked to the bossman Jerry, Rich said he'll be able to get some pics up tomorrow. He's got a big dealer order on his table atm, but rest assured, pics are on the way. :wink:

[ozhuntsman]

here you go Jerry, all packaged and ready to ship, they will be out by the time you see this post :wink:


BTW, Jared you did a great job on this. Well done mate !!
http://i19.photobucket.com/albums/b185/redlettersinger/P1010025.jpg

[Jerry/NJ]

here you go Jerry, all packaged and ready to ship, they will be out by the time you see this post :wink:


BTW, Jared you did a great job on this. Well done mate !!
http://i19.photobucket.com/albums/b185/redlettersinger/P1010025.jpg

Thanx Oz, lookin good! .......and yes he did an excellent job, I suggest he get a raise. :wink:

[CoppertoneSPF15]

Thanx Oz, lookin good! .......and yes he did an excellent job, I suggest he get a raise. :wink:

Way ahead of you Jerry. :wink: We took care of that earlier this week :)

[richs70cyclone]

i did e- mail you yesterday, i like # 152 hot pursuit how much is it for

1 doz. or 2 doz. can you make 2 for limbs on bow i have carbon express

maxima shafts, can you get back to me, thanks Rich

[richs70cyclone]

can you send me 1 doz. of # 152 hot pursuit, i shot carbon express mamima hunter shafts, i will pay with pay pal, how much, and were do i send it, let me no , thanks Rich

[zara_puppy]

And to the top for this thread. I've spent tons of time on the ozcrest site looking through the designs. :eek: So many!! I personally think the Phoenix Rising is an outstanding design. But it's all about personal choice. I've spoken with "Mr. Crest" via PM's several times (and I mean several times). This guy isn't just a creator of some of the best aroow crests available, he's also a veritable fountain of information where archery in general is concerned. He's helped me a ton - and helped me to get set up so that I've had my best hunting year yet. And the only reason he did it was because he wanted to help. No kidding - I pestered him a bunch and he never even flinched. He just kept helping. With this in mind, and knowing that he knows of what he speaks, I can't wait to get my wraps. And yeah - with me at the bow these wraps will definately be tested for toughnes:embara:. I'll keep everyone posted. In the mean time I'd like to thank Rich for all he's done. And Mrs. Crest is outstanding as well. Thanks guys!

[CoppertoneSPF15]

And to the top for this thread. I've spent tons of time on the ozcrest site looking through the designs. :eek: So many!! I personally think the Phoenix Rising is an outstanding design. But it's all about personal choice. I've spoken with "Mr. Crest" via PM's several times (and I mean several times). This guy isn't just a creator of some of the best aroow crests available, he's also a veritable fountain of information where archery in general is concerned. He's helped me a ton - and helped me to get set up so that I've had my best hunting year yet. And the only reason he did it was because he wanted to help. No kidding - I pestered him a bunch and he never even flinched. He just kept helping. With this in mind, and knowing that he knows of what he speaks, I can't wait to get my wraps. And yeah - with me at the bow these wraps will definately be tested for toughnes:embara:. I'll keep everyone posted. In the mean time I'd like to thank Rich for all he's done. And Mrs. Crest is outstanding as well. Thanks guys!

:thumbs_up Concur 100% :wink:

One of the hardest working guys I know. I think Rich even works in his sleep! :eek:

[zara_puppy]

Yep - next time you see him tell him I tried that 'hunting on the ground' thing. While I was watching a six pointer and a doe sneak behind me at about 45 yards another doe sneaked up (snuck up?:confused:) to my left in the high grass I was kneeling in. We looked at each other for a few seconds then she took off barking the whole time. The old girl wouldn't shut up! Grabbed up my stuff and lit around the end of the woods and got out of there. From now on I'm hunting from above!!

[ozhuntsman]

can you send me 1 doz. of # 152 hot pursuit, i shot carbon express mamima hunter shafts, i will pay with pay pal, how much, and were do i send it, let me no , thanks Rich

Order has been received via email and they will ship tomorrow mate. :wink: Thanks for the support :D

[ozhuntsman]

And to the top for this thread. I've spent tons of time on the ozcrest site looking through the designs. :eek: So many!! I personally think the Phoenix Rising is an outstanding design. But it's all about personal choice. I've spoken with "Mr. Crest" via PM's several times (and I mean several times). This guy isn't just a creator of some of the best aroow crests available, he's also a veritable fountain of information where archery in general is concerned. He's helped me a ton - and helped me to get set up so that I've had my best hunting year yet. And the only reason he did it was because he wanted to help. No kidding - I pestered him a bunch and he never even flinched. He just kept helping. With this in mind, and knowing that he knows of what he speaks, I can't wait to get my wraps. And yeah - with me at the bow these wraps will definately be tested for toughnes:embara:. I'll keep everyone posted. In the mean time I'd like to thank Rich for all he's done. And Mrs. Crest is outstanding as well. Thanks guys!

Mate, I am stoked that all is going well for you. Was my pleasure. :D On the ground hunting thing, just keep trying mate, it will come together in time. :wink:

[ozhuntsman]

Just uploaded these to the website. This is a new one from Phil, and I like them..........heaps !!!!!!!

http://i19.photobucket.com/albums/b185/redlettersinger/Phoenix26.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/Phoenix25.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/Phoenix24.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/Phoenix23.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/Phoenix22.jpg

[ozhuntsman]

Phil, could you send through all the new stuff for me please. ? We are updating the site atm, so I need to upload all your new work :wink: :darkbeer:

[ozhuntsman]

Our first shipment of SLING BRAID CUSTOM BOW SLINGS has arrived, and sold out in the first day :eek: :D We will have another shipment due in around three weeks. Dealers should get in now before I re-order. These are set to be a HUGE hit here in Australia. :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/P1010026-1.jpg

[CoppertoneSPF15]

Phil, could you send through all the new stuff for me please. ? We are updating the site atm, so I need to upload all your new work :wink: :darkbeer:

I'm on it like white on rice :D

[ozhuntsman]

I'm on it like white on rice :D

Cheers mate :darkbeer: :shade:

[ozhuntsman]

Phil, I am sending out some of your wraps tomorrow mate, so let me make sure I have everything correct.

2 doz of the phoenix for Jess,
1 doz Arctic Blast for you,
1 doz Blue Riptide HOYT official
1 doz Inferno HOYT official
2 doz of ..................you will have to wait and see..........!!


:shade:

[ozhuntsman]

Candyman,

your wrapped arrows go out tomorrow afternoon mate :shade:

:darkbeer:

[ozhuntsman]

ZaraPuppy,

your wrapped arrows also go out tomorrow afternoon mate.

:darkbeer:

[ozhuntsman]

Solar,

Your wrapped arrows go out tomorrow arvo also

:darkbeer:

We are SO VERY BUSY but we are catching up !!!!!!!! :D :D :D :D

[candyman2337]

i havent checked this thead lately let alone checked AT lately but it looks like OZCREST CUSTOM WRAPS are smoking i have to keep checking this thread to keep up...ozcrest is just moving too fast.. how do you get time to shoot rich? let alone time for a beer:darkbeer:???

[ozhuntsman]

i havent checked this thead lately let alone checked AT lately but it looks like OZCREST CUSTOM WRAPS are smoking i have to keep checking this thread to keep up...ozcrest is just moving too fast.. how do you get time to shoot rich? let alone time for a beer:darkbeer:???

Yeah good point mate :wink: I barely have any time these days. My newest rig has had all of 40 shots out of it, and it is now being sold :lol: I do have 3 hunting bows currently though, with some schmicko new HOYTs on the way too :wink:. These days I just have a shot or two in my private shooting lane to keep in form, and wait until those few big hunting trips each yr. I have a trip in three weeks for some big billy's, then I might have time to hit the nationals, then off to NZ in march 08, straight from there to hunt three properties over east. CAN"T WAIT !!!!! :tongue: Then its back to work until october with a few short trips in my home state in between, if there is time :rolleyes:

:darkbeer:

[ozhuntsman]

made these up in four colours this arvo. These will be my hunting shafts for the first trip of 08. I have VFORCE HV V1, and VFORCE V1 CAMO. I have four colours in this wrap, green (pictured) , blue, apricot, plum. I will post pics of the others as I fletch them up. Only had time to fletch half doz today. :rolleyes: :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/huntingwraps.jpg

[ozhuntsman]

here is the new LOGO. We are changing out the logo this yr, so there will be a new banner soon. This is why we have not sent out any shirts or hats, as this needed to be finished. Staff will be getting their hats and shirts within the month of November at latest. I am hoping to have all the apparel out by Christmas. :darkbeer:

TEAM >>> opinions please, let me know if you guys think there should be any llast minute changes before this logo goes to print .

http://i19.photobucket.com/albums/b185/redlettersinger/logonewcopy.jpg

[CoppertoneSPF15]

Phil, I am sending out some of your wraps tomorrow mate, so let me make sure I have everything correct.

2 doz of the phoenix for Jess,
1 doz Arctic Blast for you,
1 doz Blue Riptide HOYT official
1 doz Inferno HOYT official
2 doz of ..................you will have to wait and see..........!!


:shade:

Thanks Rich! :D

Btw, I dig the new logo :wink:

[Bowhunter215]

Checkin in guys... I'm here in Xenia Ohio for the week and can't get internet very easy. Richard, Love the new logo, it looks excellent, I iwll get some new stuff made up when I get home next week. This coming weekend is booked with my gun hunt for the year and 2 hockey games to play in so I might have some time. sorry for the delay in my work, but will have some finished soon enough.


Stay safe,
Jared

[ozhuntsman]

Checkin in guys... I'm here in Xenia Ohio for the week and can't get internet very easy. Richard, Love the new logo, it looks excellent, I iwll get some new stuff made up when I get home next week. This coming weekend is booked with my gun hunt for the year and 2 hockey games to play in so I might have some time. sorry for the delay in my work, but will have some finished soon enough.


Stay safe,
Jared

Mate, sounds like you have your hands full this week. Good to hear mate, good luck with your gun hunt, and play hard in your hockey games. Don't hurt those hands though, we need those to make more wraps :shade: Stay well big fella. :darkbeer:

[zara_puppy]

The new logo looks great! Are you making wraps with the logo or is it just for the apparel? Looks like it'd make a great wrap to me.

[CoppertoneSPF15]

Hope everyone had a fun and safe Halloween! :spider::pimp2:

[CoppertoneSPF15]

ttt

[candyman2337]

logo get the thumbs up :thumbs_up looks good

[jas-legolas]

just wanted to say thanks to rich and the team for the great wraps.

http://i16.photobucket.com/albums/b45/queensparrow/arrows007.jpghttp://i16.photobucket.com/albums/b45/queensparrow/arrows001.jpg

http://i16.photobucket.com/albums/b45/queensparrow/arrows010.jpg

also got some new arrows .thanks to steve at archery shak.:thumbs_up
cheers jas..............

[zara_puppy]

Check this out!!!

http://www.ozcrest.com/staff_profile.asp?ID=17

I think he thought this would mean I'd quit pestering him. HAH!! Probably made it worse:rolleyes:

All kidding aside - before I even knew who Rich really was I was getting tips from him, swapping stories and such. This guy is the epitome of Archers helping Archers. Now that I know how busy he had been the whole time I'm even more impressed. All he concerned himself with was making my archery experience the best it could be. I can only hope that I stand up to the standards Rich lives by. Mr. OzHuntsman you are one of our greatest assets. Thank you!

[jas-legolas]

new logo looks great..................

[ozhuntsman]

Check this out!!!

http://www.ozcrest.com/staff_profile.asp?ID=17

I think he thought this would mean I'd quit pestering him. HAH!! Probably made it worse:rolleyes:

All kidding aside - before I even knew who Rich really was I was getting tips from him, swapping stories and such. This guy is the epitome of Archers helping Archers. Now that I know how busy he had been the whole time I'm even more impressed. All he concerned himself with was making my archery experience the best it could be. I can only hope that I stand up to the standards Rich lives by. Mr. OzHuntsman you are one of our greatest assets. Thank you!

Mate, I am floored by such a comment. Hunt hard buddy :wink: :darkbeer: :darkbeer:

[Bowhunter215]

I am back from Ohio. Trying to survive on about 2 hours of sleep here. I went out this morning and shot a doe at 7:45 with my .308 Dropped here where she stood and took out her spine and major arteries. My dads still out looking for a buck. Apparently my system crashed when I was away and I had to do a restore last night, I will have photoshop up and running soon I hope. all things considered though.

Take Care
-Jared

[zara_puppy]

Page 3?:confused:

I think not.:wink:

[CoppertoneSPF15]

I am back from Ohio. Trying to survive on about 2 hours of sleep here. I went out this morning and shot a doe at 7:45 with my .308 Dropped here where she stood and took out her spine and major arteries. My dads still out looking for a buck. Apparently my system crashed when I was away and I had to do a restore last night, I will have photoshop up and running soon I hope. all things considered though.

Take Care
-Jared

Sometimes I want to shoot my system with a .308 as well. :tongue:

Hope the restore goes smoothly. Looking forward to your bowhunter series. :wink:

Phil

[Bowhunter215]

you know... that sounds like a fantastic idea about now....

I am still in the process of getting the basics working.

Went out last night with my dad after school to try and fill his tag. He ended up getting a big 9... Will have pics later. 23" wide, 17" tall.

[jas-legolas]

bump in the dark!!!!!!!!!!!!!!:eek:!!!!!!!!!!!!!!!!!!!:eek:

[ozhuntsman]

all pm's have been answered :) :darkbeer:

[Bowhunter215]

Bump....

Sorry about the delay on the bowhunter wraps phil... Apparently my serial number isn't valid... I'm going to call on monday and get this straightened out.

[CoppertoneSPF15]

No worries Jarred, take your time. :)

[corbett]

Hey Rich, it was worth the wait, have a look for yourself!

[Solar]

WOW
they look nice!

Chirs

[Solar]

I have just finished fletching some new arrows for my longbow.
They are the V3 from Victory in Hot Pink with OzCrest Wraps.
ALL MONEY FROM THES ARROWS GOS TO HELP FIND A CURE FOR BREST CANCER

http://img.photobucket.com/albums/v468/chrisdaz/Victory2.jpg

http://img.photobucket.com/albums/v468/chrisdaz/Victory1.jpg

For shops that are selling Victory Arrows fell free to pm me
Let’s support a good cause and get PINK

Chris

[candyman2337]

got my victory arrows on the weekend just got to wrap them up make look pretty and then i will be ready for next years 3D season

[ddetar00]

OH MY!!!! Page 5 !!! we have all been in the woods chasing critters and have let this slip too far down.

To the top for the best wraps out there.

[ozhuntsman]

pinks arra's look sweet all finished Solar :wink:

Corbett, I am thrilled that you like your wraps mate, I was stumped for a bit there, but they turned out just right hey. Your VIctory V1 camo's should be in your hands soon. I will include some more wraps for ya :D :darkbeer:

New line being released this month called VOODOO tm. These will be a metallic holo and Coppertone is designing this series, so look out for these awsome new wraps.

http://i19.photobucket.com/albums/b185/redlettersinger/voodoologofinalcopymini.jpg

[zara_puppy]

I'd like to take credit for actually cresting these arrows, but I can't.:embara: (See "the master himself"). My wife says "they're sexy!" I have to agree. Yet another reason to get out there - I just have to see one of these disappear into "their target". And I reckon I'll have to figure out how to do it from the ground - I've been challenged so now I'll have to produce. Anyway, how about these? Sweeeeet!

[jas-legolas]

they look awsome. to good to use they should be mounted on display.........

[zara_puppy]

they look awsome. to good to use they should be mounted on display.........

You're right! Unfortunately I don't have that kind of will power. I just get the feeling these will look much better zipping along through the air than they would in a case. They could look even better disappearing into the target and emerging on the other side (with a brand new color in tow!) I'm also guessing they'll wash up just fine! Only one way to find out.:wink:

[Solar]

bump
get me up

[zara_puppy]

Bump!

[Solar]

Bump for the start of the Christmas season
These would be a grate present for your hunting mate, shooting mate or telling your mate what you want for a present.

Chris

[gonehunting 45]

Can you do almost any custom design in a floresent wrap? Like a fad from flo red to flo grn or grn to red with print? Also I have looked and can't find your prices. thanks....

[CoppertoneSPF15]

Can you do almost any custom design in a floresent wrap? Like a fad from flo red to flo grn or grn to red with print? Also I have looked and can't find your prices. thanks....

Absolutely. Sounds like a Christmas wrap. :wink:
Here's an design idea that you might like too. Metallic/reflective red faded to a flo green with print/design on top. We can slap Santa Claus on there if you like. :D

Prices are $15.95 dz shipped for the Ultimate X wraps.

$19.95dz shipped for the Elite series wraps.

I can also give 10% discount for orders of 3dz or more.


Ultimate X is a poly- synthetic with a over laminate. Brighter color, 15% more opacity so the colors are SOLID. Easy 1 step peel removal. No soaking or scraping needed for removal. They are thinner and lighter than a standard. Extremely tough. (0.63gpi, 0.00009" thick poly-synthetic vinyl ... less than a mil!! With overwrap, thickness is under 2mil)

Elite series are hand made metallic magic with candy pearls and lots of the coolest stuff ever with the strength of the UltX wraps.

[gonehunting 45]

Absolutely. Sounds like a Christmas wrap. :wink:
Here's an design idea that you might like too. Metallic/reflective red faded to a flo green with print/design on top. We can slap Santa Claus on there if you like. :D

Prices are $15.95 dz shipped for the Ultimate X wraps.

$19.95dz shipped for the Elite series wraps.

I can also give 10% discount for orders of 3dz or more.


Ultimate X is a poly- synthetic with a over laminate. Brighter color, 15% more opacity so the colors are SOLID. Easy 1 step peel removal. No soaking or scraping needed for removal. They are thinner and lighter than a standard. Extremely tough. (0.63gpi, 0.00009" thick poly-synthetic vinyl ... less than a mil!! With overwrap, thickness is under 2mil)

Elite series are hand made metallic magic with candy pearls and lots of the coolest stuff ever with the strength of the UltX wraps.

The elite series are they on the web site? Should I pm with the details for the wraps..and can I see a sample of what they would look like ...again thanks..

[CoppertoneSPF15]

The elite series are they on the web site? Should I pm with the details for the wraps..and can I see a sample of what they would look like ...again thanks..

I'm out of town for the weekend but I can send you some pics of Elite series wraps once I get home Sunday evening. Unfortunately I don't have any of those pics in my photobucket account, they're on my harddrive.

There's a few Elite Series wraps in this thread though.

On page 12:
http://archerytalk.com/vb/showthread.php?t=381903&page=12

Rich posted quite a few pics of wraps with metallic banding and pearlescent colors. Post 475 has a pic of metallic gold/orange flames. .

I don't make the actual wraps, just the designs. I can show you what a proof picture would look like, but I'd have to get Rich to make the wraps for some sample pics of the real wraps. If you'd like to see a certain design concept, go ahead and pm me the details. I'll get to work on it Sunday evening when I'm back on my comp. If you have an email addy, include that and I'll email you the wrap pics. :)

[ozhuntsman]

Hi guys, sorry for any confusion of late, as we are currently building a new site at www.ozarchery.com . Feel free to stop by and have a look at what is going on. The site is up and functioning barebones for now, but I am adding to it every day now, so watch it grow. We literally ran out of space on the other site, so this new one will accomodate everything ..... and more. !! Open to any and all suggestions for the new site :D

Also here is the final draft of the new logo. Yup, I changed it again but we are definately settled on this one. This is an image of the new promo stickers, and they come in all colors . :wink:

http://i19.photobucket.com/albums/b185/redlettersinger/logobluecopymini.jpg

[jas-legolas]

hi rich & sam
new logo looks really good luv that shade of blue(just needs a pheonix in it). the new website looks really good also cant wait to see it fully up and running.keep up the good work.

cheers jas..........


shoot strait
play hard
luv lots
take no crap

[ozhuntsman]

threw these together this arvo. Needed a break from website building. :) These have no names as yet, but when they do, they will be available in any colour combo. :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/dec07mini.jpg

[ozhuntsman]

here are the colours.......... :tongue:

They will be available as Ultimate X , or metallic Voodoo . :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/HT-02demo.jpg


http://i19.photobucket.com/albums/b185/redlettersinger/ozc-03demo.jpg


http://i19.photobucket.com/albums/b185/redlettersinger/CRK-08demo.jpg

[CoppertoneSPF15]

Ozcrest presents:

Avatar of Tlaloc

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/Dragonsamplertemplate.jpg

[ozhuntsman]

Now that is just AWESOME !!! :wink: Sick name too bud :darkbeer: They are gonna look sweet with holochrome lightning (voodoo only) :thumbs_up


This one is "bathing tiger"

http://i19.photobucket.com/albums/b185/redlettersinger/TG-01minicopy.jpg

[CoppertoneSPF15]

Out for the weekend until tomorrow evening.

Quick, someone grab Rich while he's out otherwise he'll get sucked back into his webpage cave!! :D

Don't forget to take sometime to sleep buddy! :wink:

[jas-legolas]

hi guys those look absolutly awsome. keep up the good work.
cheers jas............:thumbs_up:thumbs_up:thumbs_up

[timpit21]

I might have to start cresting each arrow in a different wrap as it is getting harder and harder to keep up with the designs.

Excellent stuff.

Cheers Tim

[CoppertoneSPF15]

I might have to start cresting each arrow in a different wrap as it is getting harder and harder to keep up with the designs.

Excellent stuff.

Cheers Tim

You just need more arrows. :wink:

[zara_puppy]

I might have to start cresting each arrow in a different wrap as it is getting harder and harder to keep up with the designs.

Excellent stuff.

Cheers Tim

Heck, you can spend hours on the site looking at all the designs. Then just drop by this thread and there's more!!!

And needing more arrows is right. These wraps are super tough. I will without a doubt screw up my arrows before the wraps show wear. Still as bright and vibrant as ever.

[ozhuntsman]

Out for the weekend until tomorrow evening.

Quick, someone grab Rich while he's out otherwise he'll get sucked back into his webpage cave!! :D

Don't forget to take sometime to sleep buddy! :wink:

Haha, Sleep? I forgot what that is. :eek:

Been busy with these.................... VOODOO :wink:

http://i19.photobucket.com/albums/b185/redlettersinger/PC160009.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/bling.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC170004.jpg

[ozhuntsman]

more voodoo :tongue: Pics do them no justice though. These things shine different colours and are holographic which is impossible to capture in a photograph. Like jewellery for your arrows. Xtreme BLING !! Launching these officially in Jan 08, but a few lucky AT'rs will get to shoot these ahead before the release date. Phil will fill you guys in on the details there. These wraps are beyond description, just breathtaking. :darkbeer:

http://i19.photobucket.com/albums/b185/redlettersinger/PC170008.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC150065.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC170016.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC170014.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC150085.jpg

[CoppertoneSPF15]

Check out this thread for the Christmas giveaway. :wink:

http://archerytalk.com/vb/showthread.php?t=601895

Submitting an entry is so easy, even a caveman could do it. :tongue:

[gpalma]

OK...need some help for a colorblind shooter :)

What Blaser vane colors would you use with these wraps? Going to shoot 3D indoors with these U/L22 Pro's. They have been hard shooting SOB's lately and I stripped the vanes off because I have 2 weeks before the next indoor match. Hated to do it because changing things around when they work is not normally a smart move. Be that as it may, what colors would YOU use to dazzle the eyeballs of the shooters next to you, hehehe?

TYIA...!

[CoppertoneSPF15]

Some white or purple Blazers would mesh will with those wraps imo. Personally, I'd put some tre bark purple Gateway feathers on those though. I'd hand pick out the feathers with most purple/white in it and use a 2" shield cut chopper. That would look sweet! :wink:

[gpalma]

Well, I ended up trying some in all white and all yellow. I'm waiting on some purple/white Rayzors and purple Blasers.

What I found interesting was that I screwed up a couple of the fletches and was able to prep the shafts very fast by peeling off the vanes and wiping the clear overlay with acetone. Sure makes life easy.

[Martin Angel]

Haha, Sleep? I forgot what that is. :eek:

Been busy with these.................... VOODOO :wink:

http://i19.photobucket.com/albums/b185/redlettersinger/PC160009.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/bling.jpg

http://i19.photobucket.com/albums/b185/redlettersinger/PC170004.jpg


How about a hotpink voodoo wrap or pink and purple mix?

[CoppertoneSPF15]

How about a hotpink voodoo wrap or pink and purple mix?

We can do pink, we can do purple, we can do both, anything you want :wink:

I'll ask Rich to see if he can maybe make a demo arrow to showcase a pink Voodoo for the ladies. :)

[CoppertoneSPF15]

What I found interesting was that I screwed up a couple of the fletches and was able to prep the shafts very fast by peeling off the vanes and wiping the clear overlay with acetone. Sure makes life easy.

Aren't refletchable wraps grrrrreeaat!? :D

I love that versatility!! Saves me a load of time when I can strip a damaged feather, stick on a new one, and be back shooting that same arrow within a minute or two. Makes me wonder how we ever got by with the plain ol non-refletchable wraps. :tongue::wink:

[zara_puppy]

Aren't refletchable wraps grrrrreeaat!? :D

I love that versatility!! Saves me a load of time when I can strip a damaged feather, stick on a new one, and be back shooting that same arrow within a minute or two. Makes me wonder how we ever got by with the plain ol non-refletchable wraps. :tongue::wink:

Well - I haven't had a chance to test the versatility yet!! Hundreds of shots on these Ozcrest wraps and as yet can't tell they've ever been shot!! All through a whisker biscuit, some up to the fletchings (and beyond:eek:) into the target. Maybe if I were a better archer I'd get that nicked up fletching so I could try!

On another note: Merry Christmas and Happy New Year to all shooters across the globe. May Santa have you on the "nice list" - and maybe drop a few of the coolest, toughest and most versatile wraps in the business in your stocking!

[gpalma]

Aren't refletchable wraps grrrrreeaat!? :D

I love that versatility!! Saves me a load of time when I can strip a damaged feather, stick on a new one, and be back shooting that same arrow within a minute or two. Makes me wonder how we ever got by with the plain ol non-refletchable wraps. :tongue::wink:

Showed those wraps to the local pro shop and several guys shooting there tonight. All were favorably impressed. The dealer will contact OZ to discuss terms. They all agreed that I needed some purple fletch to go with these. That job will have to wait. Have another dozen GT22's en route and those will get the purple.

Can't say that I shot any better with them, but I sure looked better :)

[jas-legolas]

just wishing the THE OZCREST team a merry xmass and happy new year. hope next year is full of more great ideas and inovations. thanks guys &gals
cheers jas.............
dont have to much of this---------:darkbeer::darkbeer::darkbeer:

[gpalma]

The boss man must be busy on the new site and shipping out orders. :wink:

[tedicast]

Lets get this off of page 8!!!!

[CoppertoneSPF15]

Happy New Year fellas!! :occasion16::rockband::hatparty:

We got some exciting things lined up for 2008! 2007 was a great, great year but 2008 is going to be even better :D

Bossman is back in the saddle and we're running on all cylinders again. Keep your eyes peeled for some wicked cool stuff coming up soon. :wink:

[zara_puppy]

Eyes peeled - waiting.....Impatiently......

[zara_puppy]

Why part one? Because I'll put these wraps through their paces, guaranteed. Here's the story - I was target shooting with my shooting partner yesterday - from the garage out into the driveway. I was aiming at the lower left spot on the target which was about four inches above the snow covered gravel driveway. And yep - I flinched and the arrow went under the target. Pinched between the target, snow and gravel the arrow spit out the other side and disappeared into the yard. We didnt' see where it went. After searching about an hour we called it quits for the day. Today we returned to the search with my neighbor and his metal detectors. After about an hour we found it buried in the grass and mud. We pullled it out point first - after a short cleaning the wrap and fletchings were in perfect shape. This arrow has been through a whisker biscuit a couple hundred times, through gravel and snow and buried in the mud - and the wrap and fletchings look like new. That boys and girls is tough. Torture test part two is coming soon. Anybody wanna guess that outcome?

[CoppertoneSPF15]

Eyes peeled - waiting.....Impatiently......

Soon my friend... very soon.... :wink:

[jas-legolas]

come on guys the SUSPENCE is driveing us round the twist.:frusty:
dont leave us dangling to long.............................................. ..
jas.........

[speedfreak]

Just to have the best wraps back on top.:darkbeer:

[zara_puppy]

Just to have the best wraps back on top.:darkbeer:

Absolutely!

[Collis]

TTT

And to let you know I sent you a PM. Time to get things wrapped up!

[speedfreak]

Hey Rich I've got an idea for a limb decal for my Shadowcat, are your decals made to cover the entire limb or can they be any size?

[CoppertoneSPF15]

Hey Rich I've got an idea for a limb decal for my Shadowcat, are your decals made to cover the entire limb or can they be any size?

We can make decals to cover the entire limb. We can also make the type of decals that transfer on. It's the cut out kind that comes on a clear sticky sheet where you stick it on and peel off the clear layer leaving the decals.

We also have something better. :wink: I'll just copy and paste what I got from Rich:

It's a newer product that works the same, but it's prelaminated in a solvent proof clear that is as clean as glass, will not scratch, and your graphics will never wear, peel or crack.

[CoppertoneSPF15]

Btw fellas, Rich is up to his ears in work. Christmas backlog and all. He might not log on AT in time to see your questions so feel free to either pm me or you can email Rich directly at richard@ozcrest.com

[CoppertoneSPF15]

Good news and bad news fellas. Good news is that we're busy busy busy, bad news is we're busy busy busy. :confused:

Rich is still tackling the backlog from Christmas break so unfortunately, our estimated delivery time for international orders (non-Australian addresses) are at ~ 7-21 days. :( Rest assured, Rich is busting tail to get caught up though. We apologize for the delay and appreciate the continued support, thanks guys.

So now for the good news :D

Our Ultimate X wraps has been improved! Up until now, the vinyl print layer was 0.9gpi and the overlaminate layer was 0.73gpi for a combined wrap weight of 1.63gpi. Whatever it is that Rich did, of which I haven't the slightly clue what it was, the layers are now each only 0.45gpi for a standard 1" wide wrap. That's a combined weight of 0.9gpi!! Lighter than the conventional 1 layer wraps with all the benefits of the OzCrest laminate wraps!! How wicked cool is that?!

More good news, the Crunch lineup is going to print and Rich is flying out with our partners to the factory this week. Crunch camo clothing line is almost here. :D

Some new designs will be released soon as well. Here's a preview of some prints I got from Rich this week. Had to take a few pics from various angles to somewhat capture the "Voodoo-ness" of the Voodoo wraps. Very tricky stuff trying to get the background light to work with the flash and avoid the glare from the plastic wrapping. Yes yes, I know I could've just taken the wraps out of the plastic wrapping but unfortunately, these wraps aren't for me :sad:. Notice the never before seen Flaming Skull wraps. :wink:

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Giveaway%20wraps/Giveawaywraps-reg-1.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Giveaway%20wraps/Giveawaywraps-reg-2.jpg

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Giveaway%20wraps/Giveawaywraps-lrg-1.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Giveaway%20wraps/Giveawaywraps-lrg-2.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Giveaway%20wraps/Giveawaywraps-lrg-3.jpg

[CoppertoneSPF15]

Here's a little decal Rich made for his 16 yr old daughter's surfboard. Pretty snazzy ain't it?

Think this is one the ladies might be interested in for their wraps. :wink:

338645

[gpalma]

Bad night last night. Made up my GT U/L Pro 22's just the way I wanted them. Fired two into my Morrell Range target and the danged thing decided to fall over. Now I can make those 2 arrows into fancy Ozcrest wrapped pencils or pens. Almost cried...

[ddetar00]

OH MY!!!! Page 7... to the top with this!!! Sorry I have been absent for A WHILE. but getting back in full swing now... Little Cydnee is doing great!!! Thanks for everyones support.

Hunting Season has wound down and spot / 3-D is upon us!!! Time to get creative and order up some custom designs !!! Make them arrows scream or attention!!!

Rich, you and Sam are the best!!! Thanks for all you do...:darkbeer:

[ddetar00]

TTT... again:wink:

[Solar]

Hi All
just a Bump to get em on top.

Chirs

[zara_puppy]

No kidding! These wraps are tough! And they look cool - BONUS!

[ddetar00]

Back to the front...

[Solar]

back to page one

[zara_puppy]

Got some Voo Doo's on the way. Should be extremely sweet. I'll post pics when they arrive.:wink:

And by the way - back to page one!!

[CoppertoneSPF15]

Thanatos

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/ThanatosSampler.jpg

[mad34b]

pm sent

[jas-legolas]

awsome!!!!!!!!!!!!!!!!!!!!!!
http://i16.photobucket.com/albums/b45/queensparrow/drool.gifhttp://i16.photobucket.com/albums/b45/queensparrow/drool.gifhttp://i16.photobucket.com/albums/b45/queensparrow/drool.gif

[zara_puppy]

awsome!!!!!!!!!!!!!!!!!!!!!!
http://i16.photobucket.com/albums/b45/queensparrow/drool.gifhttp://i16.photobucket.com/albums/b45/queensparrow/drool.gifhttp://i16.photobucket.com/albums/b45/queensparrow/drool.gif

Those are hot! And it's not just the flame!

[CoppertoneSPF15]

pm sent

mad35b, shoot me a pm. If you pmed Ozhuntsman, you might not hear from him for a few days. He's pretty much glued to the printer right now getting wraps made. :wink:

[zara_puppy]

To The Top!!

[Po_Boy]

Sorry if someone has asked this but can you print metallics to match say the Black Platinum riser on my new Slayer? If so is it just a straight metallic or can a ghost image or possibly a light marbling of other colors be mixed in(say a primary black platinumb base marble with LSU purple and gold mixed in)? Thanks for your time!

Scott
Scott and Son Archery

[CoppertoneSPF15]

Sorry if someone has asked this but can you print metallics to match say the Black Platinum riser on my new Slayer? If so is it just a straight metallic or can a ghost image or possibly a light marbling of other colors be mixed in(say a primary black platinumb base marble with LSU purple and gold mixed in)? Thanks for your time!

Scott
Scott and Son Archery

Sounds like what you're thinking of is something along the lines of the Voodoo wraps but with a chrome base instead of holochrome. We can definitely match that black plat color and marbling of other colors is no problem. Colors that best show off the "metallic" gleen though are medium to lighter colors. The black will still look metallicky but a royal purple or yellow would tend to pop more since the dark colors will tend to absorb light more.

[CoppertoneSPF15]

OzCrest Custom Wraps are now official licensed to print Martin logos. :D

We also have a few other big names in the works. :wink:

Here's a few Martin limb decals, just a sampling of what's in the works. A little something something for our friend Speedfreak.

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/ShadowcatlimbdecalMartin3.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Shadowcatlimbdecal3.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Shadowcatdecalsflames2.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Shadowcatdecalsflames1.jpg
http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Shadowcatlimbdecaldraft1.jpg

[timpit21]

So many wraps and so few arrows

I think I might need to buy some more arrows.

[Po_Boy]

Sounds like what you're thinking of is something along the lines of the Voodoo wraps but with a chrome base instead of holochrome. We can definitely match that black plat color and marbling of other colors is no problem. Colors that best show off the "metallic" gleen though are medium to lighter colors. The black will still look metallicky but a royal purple or yellow would tend to pop more since the dark colors will tend to absorb light more.

Sounds good, the royal purple and yellow would work just fine for LSU and the vanetec vanes I have. Is there any way to see what it would look like with those colors and possibly the Tiger logo where the skull is on the wraps displayed on this page or with just LSU written on them? Thanks for your help and if you could shoot me a PM with the price I would appreciate it.

Scott

[zara_puppy]

I'm not just bumping this to the top - this is a note for all you folks to tell you about the quality of the staff for Ozcrest. Not only are these wraps the toughest and coolest (is that even a word :confused:) you can get, the staff for Ozcrest is extremely knowledgeable, helpful and friendly.

These folks go the extra mile. No kidding - they are the best! Give them a shout and see for yourself!:nod:

Special Thanks go out to CoppertoneSPF15 - he puts up with me and that ain't easy!

Official Martin Wraps? Wow! You guys are busy! And those Martin Wraps are waaaaay cool.

[mad34b]

Pm sent.

[zara_puppy]

Up, Up, Up!:wink:

[J-Daddy]

Any chance I could get a sample picture of some red flame wraps over a white base? I've had other people make this design for me in the past but I'd like to see what kind of cool spin Ozcrest can put on them cause I need some more wraps to fletch another dozen AXIS shafts up. Also what length are your wraps? I'd like some 6" long if you make them and sized for the slim AXIS shafts.

[Collis]

Never thought I'd do this, but I'm actually gonna show off my arrows here. Check these nano-XR with OZ's wraps, and Bidelta 2.5 inch sharktooth vanes.

I think they look cool! Or hot... Whatever.

Now all I need is some points for these things...

http://collis.mine.nu/images/IMG_4120.jpg

http://collis.mine.nu/images/IMG_4119.jpg

[J-Daddy]

Never thought I'd do this, but I'm actually gonna show off my arrows here. Check these nano-XR with OZ's wraps, and Bidelta 2.5 inch sharktooth vanes.

I think they look cool! Or hot... Whatever.

Now all I need is some points for these things...

http://collis.mine.nu/images/IMG_4120.jpg

http://collis.mine.nu/images/IMG_4119.jpg


Collis, what's the name of the pattern on those wraps? I love the way they look. Think I might need me some of those.

[CoppertoneSPF15]

Any chance I could get a sample picture of some red flame wraps over a white base? I've had other people make this design for me in the past but I'd like to see what kind of cool spin Ozcrest can put on them cause I need some more wraps to fletch another dozen AXIS shafts up. Also what length are your wraps? I'd like some 6" long if you make them and sized for the slim AXIS shafts.

I'll work on a white base render and have that up Sunday or Monday.

[CoppertoneSPF15]

Never thought I'd do this, but I'm actually gonna show off my arrows here. Check these nano-XR with OZ's wraps, and Bidelta 2.5 inch sharktooth vanes.

I think they look cool! Or hot... Whatever.

Now all I need is some points for these things...



Thanks for the pics Bart! Those are some sharp looking arrows. :wink:

[Collis]

Collis, what's the name of the pattern on those wraps? I love the way they look. Think I might need me some of those.

These are the pacific dream (white tip) #3.

I really love the way these came out. I envisioned it kind of, but it's always a gamble. But the colors on these wraps really is as amazing as everyone states, and they apply like a breeze.

I have a crymson red riser, and this matched up perfectly. Coppertone helped me to pick a place and color for the name, and the lenght of the wrap etc. Customer service doesn't cover it as a word... It's like a friend is helping you out.

[J-Daddy]

I'll work on a white base render and have that up Sunday or Monday.


Thanks Coppertone, I look forward to seeing what kinda spin you guys can put on the red flame over a white base. Seems like everyone else does the same basic cookie cutter design on them but I know you guys make up some cool stuff so I wanted to see your take on them.

[CoppertoneSPF15]

Okie doke, here's a couple for Po Boy and J-Daddy.

First up are the LSU wraps. Sized for X-Cutters, the short one provides 1/8" overlap on a 0.382 dia X-Cutter and is 5" long. The longer one comes to 8".

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/LSUflamesshort.jpg

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/LSUflames.jpg

And a re-render of Thanatos red flame with a white based background and something else with a red flame.

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/ThanatosWhiteBase.jpg

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/RedFlametribal.jpg

[J-Daddy]

Coppertone, do me a HUGE favor and save those flame patterns cause I'll be ordering some as soon as I figure out what arrows I'm gonna shoot since I'm switching bows in the next week or so. Those are by far the best looking flame wraps I've ever seen...Oh yeah, how much $$ for a dozen of them?

[CoppertoneSPF15]

Coppertone, do me a HUGE favor and save those flame patterns cause I'll be ordering some as soon as I figure out what arrows I'm gonna shoot since I'm switching bows in the next week or so. Those are by far the best looking flame wraps I've ever seen...Oh yeah, how much $$ for a dozen of them?

No worries, I keep every design I've ever made. In fact, I have a 500gb external drive just to store backups. :wink:

As far as pricing, it depends on which vinyl you'd like to print on. For our Ultimate X print, it's $15.95 shipping included. If you're looking to keep the white background white, the Ultimate X will work splendidly. For a description of our different prints, check out our new website, www.ozarchery.com (http://www.ozarchery.com)

[Po_Boy]

:jaw: CT those look fantastic! I should be ordering my arrows today so I'll get with you to let you know exactly which lenght I want. I'll also try and get some measurements for you on the stabilizer wrap. Let me know what they will run on the Voodoo per Dz. I might have some more GT CAA's on the way as well so I'll get back to you for wraps on those as well later on. GREAT WORK!:thumbs_up

[J-Daddy]

Coppertone, I'd like to keep as much white on there as possible for the back end of the wrap since these will go on hunting arrows and I'd like to keep them as visible as possible. So the more white the better towards the nock end. I gotta say you guys do the coolest looking wraps, I'm very impressed with your graphics compared to everyone elses.

[CoppertoneSPF15]

Can do, I'll increase the white bias on the nock end and crank up that fade out. :)

[CoppertoneSPF15]

Got some quick announcements:

For those of you that have been running into difficulties contacting Richard Albert through the email addy: richard@ozcrest.com, there's a good reason. It's on the frits. At the moment, it looks like the richard@ozcrest.com email account might be down for the count so please use:

ozcrest@aapt.net.au

to contact Rich.

Also, the new website, www.ozarchery.com (http://www.ozarchery.com) will be up and running very soon. Bumping into some uploading issues that will be sorted out in a few days. The new site has been revamped with an improved interface. Rich sent me some screens and I gotta say, it looks wicked sweet. :D

[boder]

Is it possible to see the neon green thanatos on white with a firefighter scramble maltese cross where the skull is?

thanks

[CoppertoneSPF15]

Is it possible to see the neon green thanatos on white with a firefighter scramble maltese cross where the skull is?

thanks

I'll have something for you tomorrow evening :)

[CoppertoneSPF15]

Is it possible to see the neon green thanatos on white with a firefighter scramble maltese cross where the skull is?

thanks

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/Thanatos-Fireman.jpg

[jas-legolas]

you are one amazing person coppertone keep up the awsome desiegns.
jas.........................

[zara_puppy]

Page 4!?!?!:eek:

Maybe not! Bump for a quality bunch of folks!!

[allegrofuzzy]

Can you do a Hello Kitty wrap? Or bluebirds? Something really girly for my wife's arrows? No, really, they're for my wife, not me!:D

She uses CX Thunderstorm 3050 arrows.

[CoppertoneSPF15]

Can you do a Hello Kitty wrap? Or bluebirds? Something really girly for my wife's arrows? No, really, they're for my wife, not me!:D

She uses CX Thunderstorm 3050 arrows.

I think I might have to turn in my man card for even making these but I'll see what I can do. :tongue:

Phil

[candyman2337]

Put my voodoo wraps on and they look awsome photo's will not do these any justice at all, they just make my x-ringers look too good to shoot now

[gpalma]

New site is looking very nice indeed.

You guys clearly have wraps that are stunning in comparison to anyone else. In fact, they don't even come close. With that clear overlay system that you use, refletching is a real breeze. By far and away, these wraps are the best that I have ever worked with.

[HARLEYFIVESEVEN]

Do you have the Hoyt Riptide Blue ? If so how much ? Thanks, Harley

[CoppertoneSPF15]

Do you have the Hoyt Riptide Blue ? If so how much ? Thanks, Harley

We can generate patterns to match the Hoyt Riptide. My current wraps are actually a variation of the Hoyt Riptide.

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrows/Hoytstaffwrapsblue.jpg

Unfortunately, at the moment, we only have permission to print Hoyt trademarks/logos for OzCrest staff and Hoyt staff shooters. Hoyt has not given anyone unrestrainted permission to print their logos although you've probably seen some Hoyt logo prints floating around. We are in active talks with Hoyt and any developments will definitely be posted here.

But aside from the logos/trademarks, we can print patterns that match the Riptide. Here's a small, low res sample:

353667

Let me know what kind of graphic you'd like and I'll work up something for you.

[HARLEYFIVESEVEN]

That would probably work. What are the sizes of the wraps? Cost ?
Thanks, Harley

[CoppertoneSPF15]

That would probably work. What are the sizes of the wraps? Cost ?
Thanks, Harley

The size is dependent on your arrows. Each order is customized. We size the wrap width to suit the arrows you're using. Wrap length is up to you. If it's unusually large, we might add an additional charge for the extra material but not for normal wrap lengths of 6-8"ish.

Cost is dependent on the vinyl type. Our Ultimate X prints are $15.95 with shipping, Elite Series $19.95 /w shipping, and the Voodoos are $24.95 /w shipping. Our new website has a description of the differences of each print type in addition to vinyl specs. For instance, the Ult X is 0.9mil combined thickness and 0.9 grains per inch combined thickness (for a 9/32" arrow). Other stats are published on the website as well (www.ozarchery.com).

And as always, all the print types are guaranteed not to fade, smudge, smear, is solvent proof and refletchable.

[HARLEYFIVESEVEN]

I am using the wraps for something a little different. I made two rear stabilizers out of carbon 300 arrows. I have six 9 inch arrows to wrap so that is the question for the size. Ideally they would be 9 inches long to cover a 300 size arrow. I have a front blue Doinker Quadraflex and a riptide blue bow so the will be different. I didn't want any logos or wording on them. They will sorta be an accent addition. Let me know on the size.
Thanks,
Harley

[CoppertoneSPF15]

I am using the wraps for something a little different. I made two rear stabilizers out of carbon 300 arrows. I have six 9 inch arrows to wrap so that is the question for the size. Ideally they would be 9 inches long to cover a 300 size arrow. I have a front blue Doinker Quadraflex and a riptide blue bow so the will be different. I didn't want any logos or wording on them. They will sorta be an accent addition. Let me know on the size.
Thanks,
Harley

If you mean Carbon Express 300s, it's most likely the standard 9/32" dia shaft (equivalent to GT5575, Easton Epics, CX Maximas, etc...). Something like that would use something around a 1" wide wrap.

And yes, we can make a 9" long wrap, no problem.

Something to keep in mind is if you're using 9" shafts to make one of those multi-rod side bars, the exposed area of the shaft will be slightly less. And depending on the retaining blocks, you'll most likely want to keep the shaft ends bare on assembly. I know many of those multi-rod kits use screws to tighten down and are fitted close tolerance but I've also seen some that are press fit. Trying to force fit an 9" shaft wrapped tip to tip could potentially cause slightly wrinkling from the vinyl getting bunched up where the shaft enters the end pieces. We can still make the 9" long wraps, no problems there. You might want to do some trimming though prior to assembly.

[jas-legolas]

TTT for best wraps around

[zara_puppy]

TTT for best wraps around

Yeah - what he says. :wink:

[zara_puppy]

To the top. Killer designs on these wraps. Coppertone is da man!!

[zara_puppy]

Up, up, up!!!

[bowhunter3762]

pm your way

[Po_Boy]

Great looking wraps guys, can't wait to get some on my arrows!

[zara_puppy]

Up up up! Gotta keep these wraps on page 1!

[ddetar00]

CopperTone, I have some special arrows coming that have a unique camo pattern:wink: which I want to incorparate into the wrap. can we do something on clear vinyl so the camo shows thru. look at post 466 on page 12 and post 513 on page 13. I have the wraps that you see on #466, where you see blue bands, make them orange, leave the chrome trim, where you see white would be clear. The wrap on post 513 has a better band pattern for the fletched area... so want to use something like this rather than the swirl. Oh, I still want the dragon and the Ying/Yang in chrome (if possible).

What do ya think?
You and Rich are doing an awesome job with these wraps... everyone that sees them loves them. Kepp up the good work, an we will keep spreadin the news.

[CoppertoneSPF15]

I'll get that going for you Dennis.

Kind of a FYI for all:

At the moment, I'm out of town on business. I'll be traveling on and off between California and Washington for the next few weeks so things might not turn around as quickly. I have a travel laptop from work though, so I'll be keeping up with posts, pms, and emails. Rest assured, all inquiries will be responded to and all orders will be filled. Just might take a day or two longer.

Thanks for the support fellas! :D

[ddetar00]

no hurry... i think the arrows will be a while anyway... Thanks

[zara_puppy]

I'll get that going for you Dennis.

Kind of a FYI for all:

At the moment, I'm out of town on business. I'll be traveling on and off between California and Washington for the next few weeks so things might not turn around as quickly. I have a travel laptop from work though, so I'll be keeping up with posts, pms, and emails. Rest assured, all inquiries will be responded to and all orders will be filled. Just might take a day or two longer.

Thanks for the support fellas! :D

Good to "see" you CT! How's the traveling going? Have you had much time to get any neeww designs out? Your stuff really rocks!

[CoppertoneSPF15]

Good to "see" you CT! How's the traveling going? Have you had much time to get any neeww designs out? Your stuff really rocks!

Unfortunately when I do get a spare moment, I've just been zonking out on the couch or replying to pms and emails. Not all bad though, my company did put me up in a nice hotel so it's a very comfortable couch. :wink:

Your buddies arrows are almost done. I haven't been home yet to see if the fletching has arrived but I'm sure they'll be waiting for me once I get back. Think he'll be quite pleased though. The wraps came out looking flippin sweet. :D

[zara_puppy]

Never a doubt (about the arrows).

Got anything in the works to match up to the new crunch camo?

[CoppertoneSPF15]

Never a doubt (about the arrows).

Got anything in the works to match up to the new crunch camo?

Well, we do have suits, hats, and all sorts of neat gear in production at the moment. :D

And soon, we'll be seeing Crunch camo on a very popular manufacturers product. :zip::wink:

[BowmanPa]

Paul did a Great Job of coming up with what I wanted and Albert did a Awsome Job of Making my Custome Wraps. The Price was Great for coming over from Australia. I will buy more Wraps from Ozcrest again. The Customer Service I recieved from Albert is Top Notch #1. My pic is not the greatest but I take another pic later and post it. If you want a Great Wrap look no further then OZCREST!!!!!!!!:wink:

http://i34.photobucket.com/albums/d114/Bowman_49ers/IMG_2408.jpg

[CoppertoneSPF15]

Thanks for the pics Emmett!

Those turned out really well. :)

[zara_puppy]

Paul did a Great Job of coming up with what I wanted and Albert did a Awsome Job of Making my Custome Wraps. The Price was Great for coming over from Australia. I will buy more Wraps from Ozcrest again. The Customer Service I recieved from Albert is Top Notch #1. My pic is not the greatest but I take another pic later and post it. If you want a Great Wrap look no further then OZCREST!!!!!!!!:wink:

http://i34.photobucket.com/albums/d114/Bowman_49ers/IMG_2408.jpg

Saweeeeeet!!! Customs! Gotta love 'em!!

[zara_puppy]

Well, we do have suits, hats, and all sorts of neat gear in production at the moment. :D

And soon, we'll be seeing Crunch camo on a very popular manufacturers product. :zip::wink:

:zip:

[zara_puppy]

Ttt!!!!

[zara_puppy]

To the top for the toughest wraps around!:wink:

[Solar]

Back to page 1

[ddetar00]

:bump:

[zara_puppy]

:bump:

And again!

[CoppertoneSPF15]

Thanks for the bumps fellas :wink:

Still jumpin around between Seattle and LA. We'll have some rippin cool stuff for you all once I take care of this work stuff. :wink:

[CoppertoneSPF15]

Just a reminder guys, if you have an order request or inquiry, send me a pm. Those of you sending pms to Ozhuntsman may have noticed he hasn't responded in a timely fashion. That's because he doesn't check his pms often. He spends all his time making wraps. :wink:

[zara_puppy]

Thanks for the bumps fellas :wink:

Still jumpin around between Seattle and LA. We'll have some rippin cool stuff for you all once I take care of this work stuff. :wink:

Work, work, work. Is that all you think about? C'mon - you've got really important stuff to do!!!:wink:

[ddetar00]

:eek:page three.... this just cannot be... back to the front.

[CoppertoneSPF15]

Work, work, work. Is that all you think about? C'mon - you've got really important stuff to do!!!:wink:

Well I gotta work to afford a new computer to make better important stuff on. :wink:

But I agree Mike, I do have more important things to do than work. I think most everyone can say the same. :tongue::wink:

[ddetar00]

:dancing:

[ddetar00]

:rockband: Way too quiet around here, lets see some wraps!!! Seen anything on Crunch Clothing yet??:tongue:

[zara_puppy]

No kidding - let's see some wrapped arrows, folks!!

Are you back in So Cal yet CT? By now you've got to feel like a yo-yo!!

[ddetar00]

:bump: to get the morning started

[kennyw13]

OZ Crest rocks!

[Solar]

Bump

[zara_puppy]

OZ Crest rocks!

What he says.:wink:

[ColoradoHunter]

ttt for some great products

[zara_puppy]

To the top for the best wraps in the business!!

[zara_puppy]

Bump just before work.:wink:

[CoppertoneSPF15]

Richards computer is down due to some technical difficulties. He's in the process of rebuilding everything so it looks like all orders made so far this week will be delayed a week. Most likely we'll be up and running full steam by the end of the week but until then, nothing is being printed or shipped. :sad:

Bum deal about the delay guys, sorry. But, I can still take orders and work on custom design requests in the meantime so don't hesitate to contact me if you have an idea you'd like to see put to ink... or pixel rather. :)

[zara_puppy]

Glad you're back in SoCal CT. Got any new designs in the works? It's tax return time, you know!:wink:

[CoppertoneSPF15]

Glad you're back in SoCal CT. Got any new designs in the works? It's tax return time, you know!:wink:

Oh.... I dunno.... maybe. :zip::wink:

[zara_puppy]

Bottom of page 3? Oh no no no....

[zara_puppy]

Heftin' this critter up again!!

[Solar]

page 1

[CoppertoneSPF15]

Rich is battling it out with a narly case of the flu bug. With all the computer issues as of late, the stress probably didn't help things much either. Lets pray for a speedy recovery.

On another note... guess what's shipping out tomorrow zara :wink:

[zara_puppy]

First - we're hoping for a quick recovery for Rich. He is 'da man' and we need him up and around doing his thing.

Second - Saweeeeet!!! Mr. Coppertone this is so cool!! I'll post pics when they arrive - that is unless you've already got some pics - Thanatos and Phoenix - these sticks should be HOT!

[CoppertoneSPF15]

I was thinking about taking some pics to send your way before shipping them out. Then I remembered, the anticipation would make it much sweeter once they do arrive. :tongue::wink:

[zara_puppy]

I was thinking about taking some pics to send your way before shipping them out. Then I remembered, the anticipation would make it much sweeter once they do arrive. :tongue::wink:

Heck - I'm already dyin'!! And when they get here I just get to give them away!:confused:

It's all good though - at least I get to be the one that opens them up!:wink:

[zara_puppy]

Oh yeah - I almost forgot - Coppertone,


YOU ROCK!!!

[Solar]

http://img.photobucket.com/albums/v468/chrisdaz/P3082185.jpg

Page one

[ddetar00]

Them sticks look mean!!! we were ALMOST at page two... back up!!

[CoppertoneSPF15]

A little eye candy for you Georgia Bulldogs fans.

http://i73.photobucket.com/albums/i201/CoppertoneSPF15/Arrow%20Wraps/UGAcopy.jpg

[zara_puppy]

http://img.photobucket.com/albums/v468/chrisdaz/P3082185.jpg

Page one

:tongue::tongue::tongue:

[zara_puppy]

Up for a Sunday morning...

[ddetar00]

Oh Nooooo ... Page 5 just will not do!!!!
back to the front.

[zara_puppy]

These arrows are incredible!! Thanks Mr. Coppertone - you are AWESOME!!
:hail::hail::hail:

[zara_puppy]

You're all just :greenwithenvy: !!!

[CoppertoneSPF15]

Thanks for the pics zara! :)

[jas-legolas]

These arrows are incredible!! Thanks Mr. Coppertone - you are AWESOME!!
:hail::hail::hail:



goto luvvvvvvvvvvvvvvvvv the PHOENIX! absolutley AWSOME!!!!!!!!!!!!!!!!!!!!
keepem comen CT.:hail::hail::hail::hail:

[zara_puppy]

Bottom of page three? I'm not feelin' the love folks! How about those Phoenix Rising arrows?

[ColoradoHunter]

Hope this loads, if it does here is another set of Phoenix Rising from OzCrest.

[CoppertoneSPF15]

Hope this loads, if it does here is another set of Phoenix Rising from OzCrest.

Oooooo... blue's my favorite. :D

Thanks for the pics Dennis. I've been wanting to get some of those blue Phoenixs for myself but would you believe it, I just haven't gotten around to it yet. lol

[sneak1413]

Could you show a sample of a wrap with green flames that match the color of green fobs, with a thin blue outline on the flames. under the flames and towards the back of the shaft have a diamond plate finish with a green, black, and blue crest on the back of the shaft just in front of where the fob will sit. Let me know what you can do. Thanks.

[CoppertoneSPF15]

Could you show a sample of a wrap with green flames that match the color of green fobs, with a thin blue outline on the flames. under the flames and towards the back of the shaft have a diamond plate finish with a green, black, and blue crest on the back of the shaft just in front of where the fob will sit. Let me know what you can do. Thanks.

If you could post or pm me some measurements on the FOB lap up over the shaft, I can better position the crest... ie... how far up the shaft does the FOB fit as measured from the shaft end? Also, do you have a preferred wrap overall length? Arrow brand/model? On the flames, do you prefer a solid flame, solid flame /w real flame pattern, or realistic flame look? Let me know and I'll build it up for you.