firenock v2.0a in hand

[Firenock]

THIS FIRENOCK is for Easton AXIS, AC Super Slim, Beman MFX, and Carbon Express Edge ONLY.

http://www.firenock.com/images/Assembled_Exposev20a.jpg

I just got 50 pieces of firneock v2.0a with circuit in today's mail (not in clamshell, they are coming out in a few more weeks). So I can send out about 8 sets without practice nock, but inlcude nock tool, actuator magnet and 3M die cut VHB double sided tape. 8 sets are going out to my field tester by the end of today. I wanted to tested the circuit and design really good as of now, thus would prefer all 16 sets in the field and feed back.

http://www.firenock.com/products.html#Firenock%20v2.0a

Thus, if 8 person are willing to be early adaptor to share their experience with all. I am willing to go DEEP discount on those. FYI, the polycarbonate nocks on those are not final production but 2nd run of the prototype mould, thus they are not perfect, (0.015 mm too thick, which I have to shave some off before I ship them). For those who get it from me now, I shall send you final mould nock and practice nock as they are avaliable (which is part of the deal). Please call me and I shall work out something with you if interested.



Regards

Firenock, LLC
(815) 780-1695

[HOKIEHUNTER07]

if you're asking for field testers I'll help out depending on that "deep discount"
Hokie

[Firenock]

Hokiehuner07

You use goldtip 55/75 which will work perfectly with Firenock v2.0s. It is already on no less 250 pro shop store shelf. I do not think I need anyone to field test those. :wink: I need someone who use axis arrow to test the circuitry for my v2.0a and v2.0e system now as it will go into full swing production in less than a week or so and in pack.

Thanks for the offer.

[madarchery]

Well if your looking yet. Depending on the price I would gladly help you out. I shoot axis 340's. I will give you the feedback you desire on the reliability of the nock and so forth. Send me 1 or 2 all I need to test.

[SHEGGE]

Hey I will give them a test. I shoot axis 400 and shoot every day.
Steve

[Biggun 150]

Dorge,I am very interested in trying your nocks.I currently shoot one of the other lighted nocks but do not get consistent results.I shoot the 340 axis and our season comes in next saturday.I will try to call you tomorrow soon as I get home from work.



Thanks Travis

[Super 91]

I shoot the CX Edge Hunter 250's. I'll give you a call tomorrow.

[Firenock]

I shall be up till about 2:00 am CT for I have to deal with Asian suppliers. You can call me before 12:30 am CT, after that I have to be on conference. Or you can call me tomorrow

Dorge

[Muddy41]

I would Llike to try this as well. I whoot Axis let me know the price

Thanks
Mike

[ArcheryPlus]

Dorge,
I got the firenocks for the regular carbons and they have been working fantastic.My season starts in two weeks and I shoot axis arrows. I would love to test drive those for you even if it is regular price. As long as they work. Looks at 300 fps are rarely important!! I am going to be videoing my hunts so hopefully the deer will cooperate and not be camera shy.
Let me know because I want to get shooting ASAP and firenocks on video will be awesome.
Brett

[Firenock]

Thanks for the fast respond from you all. FYI, this is for axis type thin diameter arrows only. ACC 349/epic, crossbow, and standard size carbon arrow are not part this deal.

Please make sure you use AXIS type thin diameter arrow or one of the arrow below before sending me PM. I hate to disappoint and take away slots from people who would then be on already.

Beman: Team REALTREE® MFX™, Classic MFX™, BLACK MAX™,MAX-4™
Carbon Xpress: CX Edge™,CX Edge™ Hunter
Easton: A/C Super Slim, ST Axis Full Metal Jacket, ST Axis Realtree APG, ST Axis Mossy Oak Obsession, ST Axis, ST Axis Junior

You can call me at (815) 780-1695. I would only be reachable over the phone since I am on the road today. leave me a message when I cannot be reached, I shall call you back ASAP.

[GruBBworM]

I've been shooting Easton ST Epic 400's all summer will use these this hunting season I did notice that the 3 pack of lumenock I purchased will not fit in these arrows will these that you are offering work in these?

If so I would be will to give them a try and offer all feedback

Just let me know what i need to do :-)

Jon

[Firenock]

I've been shooting Easton ST Epic 400's all summer will use these this hunting season I did notice that the 3 pack of lumenock I purchased will not fit in these arrows will these that you are offering work in these?

If so I would be will to give them a try and offer all feedback

Just let me know what i need to do :-)

Jon

Shortr answer, no. As a matter of fact, NO ONE ever make a lighted nock for that size. That's said, Firenock v2.0e will fit Epic and ACC 3/49 It is schedule to be out in a few weeks too. Please check back on www.firenock.com to get to know what nock you need.

[GruBBworM]

Shortr answer, no. As a matter of fact, NO ONE ever make a lighted nock for that size. That's said, Firenock v2.0e will fit Epic and ACC 3/49 It is schedule to be out in a few weeks too. Please check back on www.firenock.com to get to know what nock you need.

Thank you for the info.
I will check back to see
I would really like to use lighted nocks in these
if not I will go back to Maxima 250's I suppose :rolleyes:

Jon

[Sambar]

I shoot the Axis arrow and am thinking about switching to the edges this year. I would love to give the firenock a try. I hunt in the jungles of Guam and the lighted knock would be a big help with tracking the arrow in flight. Let me know how much or a deep discount and what i need to do.

[Firenock]

Thank you all for the interest. All Firenock v2.0a public beta is out. For those who want to try Firenock v2.0a need to wait for the real deal in clamshell pack or web pack in about 2 weeks. You can purchase them at shop.firenock.com when it is avaliable.