TCR1
June 6th, 2008, 09:54 AM
1 dozen Easton X7 Eclipse with the older label.
1 bare shaft, 5 fletched with 3" feathers, 6 fletched with 2" blazers.
180 gr. points (I believe); 1 point is damaged from hitting something sharp in the bale (makes the tip look like a shark head with the cut in the tip being the mouth if that makes sense :D)
If memory serves me, Shafts are 27.5" long. They have unibushings installed. I believe nock groove to end-of-shaft is 28.25" on the shafts with orange nocks. I did not measure to nock groove on the accunocks, but it should be similar as the shafts are all cut the same.
All arrows are straight. Mostly shot into SpiderWeb type target.
55.00 + shipping and will take reasonable offers or will trade for some Easton Lightspeed 500s measuring 27.5" shaft length or greater.
1 bare shaft, 5 fletched with 3" feathers, 6 fletched with 2" blazers.
180 gr. points (I believe); 1 point is damaged from hitting something sharp in the bale (makes the tip look like a shark head with the cut in the tip being the mouth if that makes sense :D)
If memory serves me, Shafts are 27.5" long. They have unibushings installed. I believe nock groove to end-of-shaft is 28.25" on the shafts with orange nocks. I did not measure to nock groove on the accunocks, but it should be similar as the shafts are all cut the same.
All arrows are straight. Mostly shot into SpiderWeb type target.
55.00 + shipping and will take reasonable offers or will trade for some Easton Lightspeed 500s measuring 27.5" shaft length or greater.