Quieting a treestand [Archive] - ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat

View Full Version : Quieting a treestand

September 23rd, 2008, 02:28 PM
Hi guys,

I just bought my first climber from Dicks, $100 on sale and a $25 sports authority coupon, yes they take them.

Anyway, its steel and heavy, but thats fine with me, it was within my buget. Ok, any advice on quieting the stand? It has a rubber tubing over the climbing cables. Should I put rubber washers? Cover the steel?

Thanks in advance,


also here is a link to the stand, and the Sports authority coupon expires TODAY! It was in the weekly circular or you can print one out online.

http://dickssportinggoods.shoplocal.c om/DSG/Default.aspx?action=browsepage detail&storeid=2550374&rapid=598716&pagenumber=6&listingid=-2090983809&ref=%2fDSG%2fDefault.aspx%3fac tion%3dbrowsepagespread%26stor eid%3d2550374%26rapid%3d598716 %26pagenumber%3d6

Martin M-7 Lynx----no idea how slow!!

September 23rd, 2008, 03:07 PM
What kind of noise is it making?

September 23rd, 2008, 03:18 PM
the stand is not making any odd noise, was looking for some proactive steps guys take thats all.

September 23rd, 2008, 03:21 PM
I had an API Bowhunter and didn't do anything extra to it.

I know Sims makes a rubber spray coating that comes in a spray can that might be something you could do is cover the whole thing with a coat or two of that. But I don't think you will really have any problems as it is now. Good luck.

September 23rd, 2008, 05:03 PM
If your stand has bolts and washers, cut small pieces of plastic milk jug and put between the head of the bolts & washers, also put a piece between the washer and stand---this will cut out the squeaks and pops