Archery Talk Forum banner

QT 3000 and blazer veins

815 views 6 replies 3 participants last post by  kcarel 
#1 ·
Anyone shooting blazer veins off a quick tune 3000? Any clearance issues? I just bought a QT 3000 off the board here and my step dad thinks blazers wont clear it.

Thoughts? Thanks!:cool:
 
#5 ·
yeah the quick tune worked good for my hoyt but I cant paper tune worth a crap with the current rest I'm using on this mathews. Very similar to quick tune and the vanes come awful close to hitting the rest. It probably is but I'm not getting paper tune on my old 300s either (standard vanes). I will definitely check out this lizard tongue. I hope the seller sent me that as well.
 
#6 ·
I use 2" Blazers on both my 3D and hunting bow with QuikTune 3000s and have excellent clearance. One bow using CX 200s and 300s and the other using CXL 250s and CXL2-250s. I don't exceed the height of the Berger hole with any other the arrows.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top