Type: Posts; User: kwilde
Sent pm earlier today, I will take it.
I have one in order but haven't shot one yet. Surprised you heard next week, I emailed Bowtech yesterday and they said they are going to start shipping end of February
Wait for reviews on them once they start shipping. I will post one when I get mine.
On a side note real world dealer pricing is around 1399, pretty close to what a carbon bow is around here.
American whitetail elastifoam, you build the frame and use their foam layers and rotate or replace as needed. Best I have ever used
I do have a boss on order, I was just curious on how much slower the fanatic will be in real world speeds, the speed you listed with the 409gr arrow is faster than I expected
Yes, 5gr/lb, wondering how it would work for a 3D bow, IBO
Thanks for the review. If you can will you shoot an IBO weight arrow through a chrony?
Do you know when you will be receiving them?
Most with the large cam are coming in 1/4 or so long with the draw stop set for most letoff. I know one with the small cam set at 27.5" that came in dead on. You could long string a small cam and get...
2 cam sizes, small cam goes up to 27.5" draw. Large cam is what you would need for either 29 or 29.5" draw
CBE Tek Hybrid. Only single pin sight I know of that has a daily adjustment and also a gang adjustment. This comes in very handy if you make any changes to the bow such as rest and new string. You...
You may need 27.5" draw mods on the e32, the elites run right on and mathews tends to be 3/8 to 1/2" long
Do you have a stiffer arrow to try? I shot cxl pros for a while but it ended up tuning easier with a linejammer, 25.5"
Carbon to carbon. I was using the 28" 75% mod and the focus grip. I never tried...
What draw weight, draw length, arrow spine, arrow length and point weight
I was hoping they would be shipping in January, I have a shoot mid February I was hoping to use it in
That's why I use flex fletch, rarely ever a need to refletch, super tough vanes
I have used cxl pros 250's on a bunch of different bows at 28.5" draw 60lbs
Chillx I had they tuned very good out of this past summer. The combo I have run is shrewd bushings with either deep six...
Try removing the third set of speed nocks on lower cam so that there are an equal number of speed nocks on top and bottom. This has helped with a nick high tear on lots of chillx's
Here is a pic of the top cam shims for a right handed bow, much larger spacer on right side of cam, for a left hand bow these should be just the opposite
Just finished a set of strings and cables for mine, brownell fury. Centershot is 7/8" with xcutters. It is just a hair to the right of center of my stabilizer. Bareshafts at 20yds right with...
Sagittarius, I'm sure you will be happy with your purchase. I hadn't shot mathews in years and my chillx was the best bow I have ever owned, accuracy wise. I may regret selling it, I like my victory...
7/8" was inline with stabilizer on mine
Ordered an extra set of 70lb limbs for mine, had a tough time deciding between 60 and 70 lb when I ordered my bow so now I will have both sets of limbs
I have been doing the same thing so today I called dealer and had them order me a set of 70lb limbs
With a stiffer spine you will move in closer to riser. I think these were designed for stiffer spine target arrows like the xxx.
I did notice when I added grip tape to try i then got a right tear
I have shot a ton of different arrows through mine. I have been very surprised at how little change I needed to get get them to tune, some required no change at all.About the most I have moved the...