That is one classy Onza Kev.!
Type: Posts; User: Spikealot
That is one classy Onza Kev.!
I had an '09 Firecat that I put around 12,000 arrows thru without any issues whatsoever. I traded it off for an '09 MOAB that my wife is still shooting...
It came with the reinforced limbs if I...
Was that left handed.?
If you find a set of Hybrix 3.0's - I'll trade you for a set of Nitro 3L's.
An Alien Z with 2.0 Hybrix cams and 155 limbs should max at 60#.
Same setup with 135's should be right at 70#.
So they use 3 cam sizes and regular or mini mods like the Nitrous did.?
An inspiration to both young and old. ! ! ! !
(no offense Barry) :-)
Yep what he said ^.
I have an '02 Jag Mag, actually one of my wife's bows, and it shoots just fine.
Put new strings on it last year and don't foresee any issues with it.
Great and dependible bow...
About the same.
AX's 62.5# 29", just a bit over 390gn (400's with 100gn) 28.5" I believe.
290 - 292fps.
Modules will depend on what cams it has.
Basic rule with Martins is you can shoot them with the limb bolts backed out 5 turns max.
Each turn drops the draw weight about 3 lbs.
:-) yeah - the photo editors musta thought the strings were just blured and wiped out the other side...
VE is shoot thru. 5 strings, different cams. Regular models are 'normal' cams, 3 strings...
Thank Ya Sir.!
It would be straight 13" limbs.
Measure the DL with the module that is on it, then you will know what the numbers above and below it corespond to.
That'll teach ya to drag it all along when yer out on the line... ;-/
Not sure if the new cams ('15 models) use the same bearings as the Nitro, Hybrix, CAT, M2, etc ( I think they do) but anyway:
The newer style Flanged bearings are part #FR3RS or FR3ZZ (stainless)...
^^^ - yup - sweet old bow and a great sight on it also.!
Are the limb butts round or square.?
I have a set of camo limbs from an Alien X I may part with.
I'll check the deflection tonight/tomorrow.
Alien Z's = 36"ata, 6.5"bh.
59"/40 1/2" with 2.0 Hybrix.
54 7/8"/40 1/2" with 1.5 Hybrix.
I think the advertized ATA for the Rytera Nemesis was 34" however with the strings/cables set dead on factory lengths, in a string jig with 100lbs on them, the ata has always ended up a bit over, bh...
Yeah - thread lengths for a Rytera Nemesis w/ 2.0 Hybrix cams is 57.75"&38.75".
BH will be right on 7" and ATA will be 34 5/16"- 34 3/8".
The fact that his ATA is 1/8" different from one side to...
Can you post pics of the top and bottom cams from the right sides nice and straight with the limbs.?
Also, measure the ata real precise on both sides and see if they are equal.
What is the brace...
Cool. So one with 1.5 cams will be 58" & 34".
Super friendly folks there and a beautiful shop.!
I've been here 57 years and this is the first 'real' Pro Shop that's ever been in Pueblo.
I wish the Ragulskys, and all the staff, the best and...
Alien X w/ 2.0 cams:
155 = 50#
135 = 60#
115 = 70#
Alien Z w/ 2.0 cams:
175 = 50#
155 = 60#
135 = 70#
Purty big looking at the shells in his belt...
Here is something different...
If your worried about pass-thru's with a rag or plastic bag stuffed box target - find an old mud flap off a semi-truck or trailer and screw it to the backside of the target. Keeps that side from...