Type: Posts; User: Doug10
Superball hooded peep included.
Just picked up one for messing around indoors…Anyone have any pointers on the cam starting point or timing? Also does anyone have some 50 or 60lb limbs?
Just picked up a 2009ish shooting star and need some 50 or 60lb limbs for her for indoors. Please let me know if you have a lead on some.
No on rest, yes on paypal and for 300.00 ill eat up the fee's to boot.
Will ship priority insured.
300.00 and it goes to ebay.
I want a bow like our dirt racing chassis used to be, no paint, bare metal/alum, no finish.
New cables on tonite, thanks to tony, and can set to 28.5, no problems. I have the mods.
I'll have to mount it in th draw board and let you know, never checked it after I got it back from Tony. Tony said it spec'ed out at 62, and it feels very simliar to my Prime Impacts which are dead...
50-60 maxed at 62 when tony tuned it.
I found the cams bind on these because the inside of the limbs need to be shaved down just a tad. I used like 320 paper with a socked that just barely fit and then finished it up with some 1000g wet....
To the top
How about 110.00 TYD.
325.00 TYD! Will put stock cable rod back on if desired.
Here are some good ones….
Page 62 post 1544. I had this bow done up to take to IBO Worlds and didn't...
Here are pictures, if they are sideways its because i hate my mac and cannot figure it out. :-(
Sorry the pictures are sideways, i hate my MAC.
I have a MAC and hate it, have no idea how to keep my pics from rotating, when i save them they are right side up :-( THe color is also off on the last photo. I know tony posted pics of it and ill...
HEre are some pictures….
I have a Hamskea rest for sale. It is not the micro tune, its the original. Comes with EVERYTHING though that a new one does, except the Halo cord and small loop rope for running it off the cable...
I have a like new TEK Hunter Pro with 3 .010 Pins, light, and new set of tapes. 120.00 TYD. Will post pictures later. The fiber was removed from the shielding tube to try and get more light into it...
I have a Ross HIT in Testarossa Orange. Is 29" draw currently, has new strings from Tony, shot bow about 3 times since. I noticed cable end loops were wearing a little bit due to a bur on the loop...
TTT for Tony!
yeah they are touch as nails!
Can you post a picture of your starting rotation point on cams?
Wes @ Stage One did me some GREAT work on my Impacts.