How's it shoot Rick?
Type: Posts; User: tpentecost83
How's it shoot Rick?
Nice!!! Looks good!!!!!
Tight is definitely desired over being loose. I keep some fine grit sand paper around and lightly sand the base of the nock to get the desired fit.
I just can't figure out what Mathews is going for.... They introduce a new riser design that obviously takes more machining time which causes the price to go through the roof on their target models...
I can also cut these and install inserts if needed.
These were my wife's arrows. There are 11 total. Also included are 3 nocturnal green lighted nocks. These are 500 spine and are 7.3gpi. They are cut 24-3/4" carbon to carbon. $60TYD paypal
These were bought for my wife and have since started shooting black eagle arrows. These are brand new, uncut, with inserts. These are fletched shafts. They are 6.3gpi. $50TYD PayPal.
These came of my 2013 Hunter. They are gray cerekote. These are the 28.5" mods for the 2013 Hunter. $40TYD PayPal.
These mods came off my 3D bow of 2014. Mods are in great shape I just done have a need for them anymore. These are 28.5" on the E35 and 27.5" on the E32. $40TYD paypal
Just looked it up, #7 is 28" on an E35. Mine are brown. Will that work?
What number is that? I have #6 and #7
Wow all democrats! Imagine that!
I am curious if anyone knows what string material and what strand count is used on the premonition HD. Leaning towards ordering some new threads but not sure how many strands they use at the factory
Premonition HD is an awesome bow for the money. Draw cycle is very smooth and the bow is very fast. I don't think you will be disappointed!
I had not shot a PSE other than a shot or two here or there in quite a while. I'll say this, anyone who dismisses the decree obviously has not shot one. They are one of 2015's best with draw cycle...
I'm interested as well. The one I shot, the limb and cable stops were put on the same setting and the limb stop was hitting a good amount before the cable stop
Also, does anyone know what the IBO ratings are for 60lb limbs? I know with Elite the IBO is 2-3fps less with 60lb limbs and a IBO weight.
What kind of speeds are y'all seeing on your decrees? Actual speeds, curious to see what your getting and at what specs(DL, DW, arrow weight)
Yes. I maxed out my stops and took one full turn off my limbs for ASA and my 28-1/2" mods measured just a fuzz under 28-5/8th on a draw board
E35 will be dead on, maybe 1/8" long on DL