Search:

Type: Posts; User: Huntinsker

Page 1 of 34 1 2 3 4

Search: Search took 0.32 seconds.

  1. Replies
    4
    Views
    108

    I've shot them through a piece of a cereal box...

    I've shot them through a piece of a cereal box and they opened no problem. If you're that concerned, you can loosen the bolt a little until you get them to how you want them. Don't go too loose...
  2. OT7, I have a question about using the RAM spine...

    OT7, I have a question about using the RAM spine tester. When you test the spine and get a difference from side to side, how do you know that you're not just seeing the difference in roundness? I've...
  3. Replies
    15
    Views
    282

    Your peep is pretty low but you could also flip...

    Your peep is pretty low but you could also flip the mounting bracket on your sight. You can see that the angle of the bracket is on the top side. If you flip it over, you'll get another inch or so of...
  4. IMO if you specifically told them to not open the...

    IMO if you specifically told them to not open the box until you arrived, and they did, then they should be discounting the bow for you. I'd say $50 is reasonable. I work at a shop and take as much...
  5. Replies
    45
    Views
    1,195

    Whoever set up your rest did it wrong. Plain and...

    Whoever set up your rest did it wrong. Plain and simple. There is no need for the rest to hit the shelf. I've set up hundreds of QAD rests and not once has the bow left my hands with it hitting the...
  6. Replies
    1
    Views
    80

    There is no noticeable difference from what I've...

    There is no noticeable difference from what I've seen. I've tested quite a few different strand counts and materials and all were within 2fps of one another. Just build a string and go with it. Most...
  7. Thread: Help please

    by Huntinsker
    Replies
    13
    Views
    227

    I wouldn't worry about your kisser or peep. You...

    I wouldn't worry about your kisser or peep. You should extend your bow arm and get stood up nice and straight, then post another pic so we can see how much you may need to change your DL. Then after...
  8. Thread: Help please

    by Huntinsker
    Replies
    13
    Views
    227

    You never want to lock your arm. You want it to...

    You never want to lock your arm. You want it to be straight but not locked. Imagine your legs. If you lock your legs, it's uncomfortable and it also takes a lot of muscle energy to keep them locked....
  9. Replies
    17
    Views
    406

    Get a black peep. Colored peeps reflect light...

    Get a black peep. Colored peeps reflect light which will blur the image that you see through them. Just like the housing of a camera lens, you want your peep to absorb the extra light so that it's...
  10. Thread: Help please

    by Huntinsker
    Replies
    13
    Views
    227

    You were slapping your arm because of your grip...

    You were slapping your arm because of your grip and bow arm rotation. Your grip hand knuckles should be 45deg to the riser and your elbow should point out to the left. Grip should look like this. ...
  11. Replies
    66
    Views
    1,822

    I don't either but it does. I don't have a super...

    I don't either but it does. I don't have a super high speed camera otherwise I would try and study it. I don't know why a lot of things happen but they do and this is one of those things. I can't...
  12. Replies
    66
    Views
    1,822

    Always think of a tear as a nock tear. That's why...

    Always think of a tear as a nock tear. That's why we talk about "nock right" or "nock high". We don't use "point low" or "point left". That's also the best way to think about tuning. You need to...
  13. Because a half twist will force the serving to be...

    Because a half twist will force the serving to be bent the opposite direction. If you bend it back and forth, it'll loosen and then separate. Just like bending a piece of metal back and forth....
  14. Personally I don't/won't do half twists in my...

    Personally I don't/won't do half twists in my cables. If I get to that point, I use the yoke legs. I don't do half twists because it can loosen the serving and cause separation.

    If I were you,...
  15. Replies
    8
    Views
    282

    Yep. The last paragraph is talking about a 56"...

    Yep. The last paragraph is talking about a 56" womans model and the last sentence says, "Excellent, too, for the man who prefers a short-draw bow".
  16. Do you have your limb bolts all the way down?...

    Do you have your limb bolts all the way down? That could change the ATA a little.

    What is your max draw weight? If you getting a reasonable max weight that's at least at the max for the limbs but...
  17. Replies
    66
    Views
    1,822

    If you read what the Easton guide says about...

    If you read what the Easton guide says about moving the rest in towards the riser is says "Move the arrow rest or cushion plunger in toward the bow". This would work if we were still using plungers...
  18. Replies
    66
    Views
    1,822

    False. If you do any thinking on the subject and...

    False. If you do any thinking on the subject and not just reading and regurgitating, you can understand why moving your rest away from the broadhead POI makes no sense.

    We all agree that the...
  19. Replies
    13
    Views
    594

    Entrance wound 2052255 Blood trail 2052256...

    Entrance wound
    2052255

    Blood trail
    2052256

    Buck
    2052260
    2052258
  20. If you added twists to the right yoke leg and...

    If you added twists to the right yoke leg and then had to move your rest, you may have caused the left tear by shortening the right yoke leg. I'd put the rest back and start again. Take a twist or...
  21. Replies
    17
    Views
    432

    I didn't see where it said that on my computer....

    I didn't see where it said that on my computer. On mine it just says "speed" and then the number. I wonder if it's just something on the phones.
  22. Replies
    124
    Views
    4,077

    Sure looks a lot better. Give it a run and see...

    Sure looks a lot better. Give it a run and see what your results tell you.
  23. Replies
    17
    Views
    432

    They probably had the format filled out and then...

    They probably had the format filled out and then just copy an pasted it for each bow and then changed the numbers according to the model.
  24. Replies
    29
    Views
    720

    Yes, start your own thread in the broadhead...

    Yes, start your own thread in the broadhead discussion section. You don't want to hijack the OPs thread.
  25. Replies
    26
    Views
    653

    At least 1-2" long. You have a good 1-2"...

    At least 1-2" long. You have a good 1-2" backwards lean and your release hand elbow is way low compared to your release hand/wrist.

    Besides that, if you had your bow tuned before hand, you should...
  26. Replies
    3
    Views
    109

    I own both. The single cam has a 35.25" ATA while...

    I own both. The single cam has a 35.25" ATA while the HC has a 35.5" ATA. The single cam has 80% letoff while the HC has 75%. There is more valley on the single cam but the HC has a smoother...
  27. Replies
    17
    Views
    432

    It's got to be a typo. The "B" and "V" are right...

    It's got to be a typo. The "B" and "V" are right next to one another on the keyboard so it's very likely that the website guys just fumbled their fingers a bit.
  28. Replies
    42
    Views
    1,656

    Very true.

    Very true.
  29. Replies
    42
    Views
    1,656

    That's kind of weird considering you only need it...

    That's kind of weird considering you only need it in there on the first peep install. I've made and installed a lot of 1 color strings and I've never needed the center marked beyond that first time.
  30. Replies
    42
    Views
    1,656

    I don't think he leaves it so that he can find...

    I don't think he leaves it so that he can find the center of the bundle for changing peeps. When you press the bow and take the old peep out, the bundle will already be split where you had it and all...
Results 1 to 30 of 1000
Page 1 of 34 1 2 3 4