Type: Posts; User: rick prather
I also think have her shoot left handed, and like Huntinsker above, let her go at her own pace as far as draw weight.
Thanks for the answer Dave. I have had 2 Exceed 300 's (used) and could hardly turn the blots---- I am thinking about buying. This bow would make 7. I guess I could drive another nail to hang it....
Got some silver ones in good shape- $70 tyd.
Are the limb bolts hard to turn???
A bow has to have some cam lean somewhere in the draw cycle due to the cable guard rod/roller.
The first thing I do is set the bow to spec and then tweak my d/l.
Now here is where I differ from...
I use Carter's Target 3 to hunt. Been with me a long time. Red so I can find it easy if I drop it. I have a black one for back up.
Just put it on loop and leave it.
I also believe "no hair...
Imo Dale is incorrect about the let-off % when moving the stops.
I know from experience you can put the stop I hole shorter than the size mod, retime, and you have a lot higher hold weight and a...
Tight nocks cause all kinds of tuning woes. Eliminate all the suspected things like that first-then start the process.
Been lots of threads on this subject.
I owned an Elite E=35 and measured the a2a at full draw= 31.5 in. and the string left the cams at 33 in. for a 27.5 dl.
I presently own and have for sale a...
Not unless you can completely relax the bow with the bolts. May be in owners manual.
Hoyt uses 2 spacers/shims. I don't know the thickness. Of the two the thinner one goes on right side of cam (right handed bow) the thicker on the left side. Call Hoyt for the thickness. From left to...
Always heli. Like poet says, 3 deg.
Leave the feathers on the turkeys.
IMO 32" a2a is too short at your d/l to touch nose to string-- Unless you raise your anchor or lengthen your d/l. Either one you don't want to do for the sake of good form. Good form will get you...
Sometimes people read one thing and think another.
This is not a discussion of one broadhead brand versus another.
The op says his field points group, but his broadheads do not.
Unless he is using...
Short brace is usually achieved by a riser design that brings the grip closer to the string.
When that happens the bow has a slight leverage advantage, compared to a bow that has grip farther from...
Sound does travel, but I'd send that cam back and have new bearings installed.