Type: Posts; User: rslscobra
Swhackers for me!
I have SX-1 Cams, 29" and 28.5" mods for sale or trade. $50 for cams and $20 a set for mods.
My first post meant SX Rush
Buy new string cable set from reputable string build should put back in spec. Put on draw board but you may have to add 1 twist or so to cables. You will need a press too.
I have the same bow. None that I can find. You can find the bow specs on Strothers web site. Hyper S cams are a little harder to tune. You need a draw board. I converted mine to a SC Rush by...
I have a used set of Strother SX-1 cams for sale or trade.
I also have a set of 29" mods and 28.5" mods.
Cams $50 tyd
Mods $20 a set tyd
Limb driver pro v
First Lite Stormtight
I use Easton Axis for Hunting too!
I would contact them directly. You can search most on here and find the price for the string and cable(s) set, but to many variables.
If buying new string & Cables you can contact Bear Foot on here (www.centercirclearchery.com) he will build and tune.
order yourself a set from the builder you want and have someone install them for you.
Center circle archery or twisted x
Saved for later
Also you sure you have an ax rush? Those came with the badger 1 cam. You may have the sx-1 if you have the hyper s cam system.
They don't have 29" mods left I know this because I called then about 6 weeks ago. I'll pm you where you can get them.
6 foot 29" dl
Mine should be posted soon! Can't wait!
Scott mongoose xt
text message sent an pm sent
Easton Axis for me
Post picture with you at full draw...don't modify your grip in any way. More then likely your bow grip hand is wrong. Knuckles should be at a 45 degree angle.
You will have no issues with the pro v either. I prefer the pro v rest over the QAD.
Lefty all the way!
Looks like it still needs to move towards the riser just a touch and you should still clear the cables. You may also just have to twist the arrow for a little more cable clearance as long as no...
Another easy way is to put a string from center of limb bolt to center of limb bolt. Then cut an old arrow and nock it. The string should run through the center of the cut arrow. This should get...
Another easy way is to put a string from center of limb bolt to center of limb bolt. Then cut an old arrow and nock it. The string should run through the center of the cut arrow.
Forget: Strother SX-1, 65lbs., 29" dl, Easton Axis Arrows 30" 430gr. shooting 295fps