Type: Posts; User: duckdawg1
Agreed with your last statement. I have my VT for speed.
Nock high isn't always bad. Has a small nock left but if your happy and accurate, call it good.
Very decent arrows.
Count me in!
Final numbers on the alpha elite #2 Z5 bow:
DW= 58# (118 def. xt comp limbs)
DL= 28.5" B mod
284.1 FPS shooting 326 grain easton lightspeeds. I'm going to still...
I'm assuming the 118 def. is just about the same as the old def 80-84. My ATA is right at 36.75 next to 36 3/8 with the #3fuels. I'm using the b mod and getting right at 28.75". I'm still tunning so...
If your peep is that big, try a thread peep where you can adjust the size without removing the old one. Each eye is different and you may need a clarifier, but blank appitures are cheaper than...
What size peep are you using? I found the going down in peep size help me out without going the clarifier way. My. 4x lens is clear with using a 3/32"peep.
I don't have any fps #s yet but the ata increased a little from stock and lost DW. It's a great upgrade and cheaper than buying a new bow. It pulls back just a smooth as my spirals but doesn't get...
I'm no franken bow expert and this was my first build, but it had something to do with the size of the z5 cam in relation to the fuel cam. My ata increase to compensate for the cam size to put less...
So I just finished my 2011 Alpha Elite Z5 build. What a nice shooting bow. Smooth as silk on the draw and well balanced. I think it is a great upgrade from the fuels if you like a little valley and...
So I just finished building a 2011 alpha elite with #2 Z5 cams and I love it. It started off with #3 fuels and 74 def. xt comp limbs (50-60#). With the swap, I lost about 8#s on my DW so I opted for...
$90 for the cams and $100 for the set.
$125 for cams and strings
I have for sale a set of #3 fuel cams with C mods. They are in great condition. $100 TYD I also have a string set for the #3 fuel cams and alpha elite. $150 for both tyd...
I have a set of 74 deflection Hoyt XT comp limbs for sale. They are off of a 2011 alpha elite. With #3 fuel cams they maxed out at 60+ pounds. They have a few scuffs from a propod and the typical...
^^^Like he said. Sounds like your timing is off.
Wilson overgrip. It's tacky when you need it and very thin. No slippage and no sticky glue. And it's pretty cheap.
Sell it. All you wil have is a worthless wall trophy. You will hang it up and try to sell it 10 years from now for 3 times it's real worth. Oh, that's someone else I know. Sell it.