Type: Posts; User: Themiddleman
I use a AAE Max impact insert adhesive.yes it is kind of expensive but there's not a better insert adhesive made in my opinion.
Yes the bone crusher stainless half out will fit in a Easton axis. They are pretty tight so i dry fit them before I install them to make sure I'm not going to have any problems.
I was told that every bow in the 2015 Martin line will be available in left-hand.
scroll on the calendar to May 2015
The Premonition does not come with America's best bowstring.
I have spent the last week shooting some of the new Martin Bows. The vast majority of you guys will love the new Martin Bows.the new cams are silky smooth and the let off is adjustable not all or...
I use a 1 inch piece of fiber optic then I flare both ends after it's been installed in the lens.
The 2010 or 2011 shadowcat had one of the nitro cams on it.
I just talked to Dave Barnsdale last week about the same subject. The only limbs that he is currently making for Martin bows are the 2009 two 2014 1 1/2 wide solid limbs.
The limbs have sold thanks mightymac
Yes with highly stressed beyond parallel limb bows this is normal. Go ahead and press the bow you have nothing to worry about.
have a brand-new set of 2008 camouflage Martin firecat limbs.these will fit any 2008 or 2009 Martin Bow but they have the firecat pro X label on one limb. they are 2H deflection which is 45-60 on the...
In all my years with Martin I have never seen one of their limbs cracked their.If the limb is actually cracked it would show up on both sides.
:zip: fastpassthrough your giving up way too much info.There will be nothing left to unveil on November 1 at this rate.
The draw stop on your bow is a limb stop and it would be impossible for it to come in contact with your string or cable. If you're y cable is being cut then your draw module is adjusted to short or...
There would be only one reason that Martin archery would not fix the gentleman's bow. being it is a five-year-old bow and everything that is happening in the last couple of years with Martin certain...
The bow in the picture is a five year old 2010 pantera not a two year old bow as stated by OP.
bfisher has said everything that needs to be said.
Here is the 2013 Bengal Pro and the 2014 eclipse side-by-side.
Although the eclipse may look a lot like your 2013 Bengal Pro the 2014 eclipse is completely different. If you set them side-by-side which I have several times you would see major differences.the...
I also know for a fact that they would replace your bow with a blade X4 and your cost would be well under $300. That's a hell of a nice bow at a great price to replace a 16-year-old bow with. This is...
Martin bows did not come with a lifetime warranty until 2004. This is the warrantee that came with your bow.
Whether your new bow is for hunting, 3-D, or for target shooting, you have...
let's get this straight. You have a 16-year-old bow that finally gives out and there's no chance in hell that there would be replacement parts to fix it. Martin offers you a brand-new 2014 Bow at...
Setting the third access on a bow is very involved and misunderstood. Here is a link with Tim Gillingham he will take you through the process from start to finish....
If you hear a snapping noise or popping noise as you are drawing the bow your draw module screws are probably loose.I would check them first and if they are loose use a little blue Loctite on the...
I will take 2 cascade 10
Firenock makes a great uni-bushing to fit that shaft. they are Very lightweight and lock into place without the need for glue.
MAP on the Eclipse is 499.99