I had bow press fingers made for $6 each

[bss]

WHOOP!

got him in the horn!!!

asking him about the leverage bolt hole or whatever you want to call it...

he's working up a quote for the 1/2 hole and the other hole...should be getting it to me within the next hour or so he said...

he advised, which I knew, that he was not a sales guy, just the poor sap cad guy that has gotten horse collared with this but he is more than happy to help...just been BUSY he said....

brb with the scoop....

[Unk Bond]

WHOOP!

got him in the horn!!!

asking him about the leverage bolt hole or whatever you want to call it...

he's working up a quote for the 1/2 hole and the other hole...should be getting it to me within the next hour or so he said...

he advised, which I knew, that he was not a sales guy, just the poor sap cad guy that has gotten horse collared with this but he is more than happy to help...just been BUSY he said....

brb with the scoop....

_______________________

Hello
Now that right there sounds good Maybe we can make a order at the same time.
I await his quote. [ Later

[bss]

just got off the phone, he is being more than helpful...was going to see what it cost for 4 in a manilla envelope or maybe flat rate....I asked if he got me that number if it would be ok if I blabbed on here to send him more business...he said sure...

with the quote he gave including shipping for say the 8 that he had, $68, asked him then about just 4 and he said that ups is still ganking for $20 shipping so $44....then he mentioned the flat rate or just in a manilla envelope scenario...

so, he is getting back to me here soon, said he was checking this out now...but even with the high ups shipping it was like $8.5 each finger...so....I will await his return email or phone call..

I had asked him about the extra tapped hole...well that was not feasible...almost tripled the price per finger....

BRB

[Unk Bond]

just got off the phone, he is being more than helpful...was going to see what it cost for 4 in a manilla envelope or maybe flat rate....I asked if he got me that number if it would be ok if I blabbed on here to send him more business...he said sure...

with the quote he gave including shipping for say the 8 that he had, $68, asked him then about just 4 and he said that ups is still ganking for $20 shipping so $44....then he mentioned the flat rate or just in a manilla envelope scenario...

so, he is getting back to me here soon, said he was checking this out now...but even with the high ups shipping it was like $8.5 each finger...so....I will await his return email or phone call..

I had asked him about the extra tapped hole...well that was not feasible...almost tripled the price per finger....

BRB

--------------------

Ok ] What about the half inch hole. Will it be there drilled or burned.

[bss]

didn't not ask him about that....he just said 1/2 hole...I will ask when I speak to him again.

[bss]

crud, forgot to ask about the hole...

anyway, $37.16 out the door shipped to Texas, roughly $24 for the fingers and $10 for first class mail and tax was $3.16

He said I could blab it on here so I am blabbing it on here.

I believe he said he had another set on hand so hop on the phones or you will have to wait till more are made....

Tres

[MightyElkHntr]

I am wanting to get in on this... do you think I could send him a Fed-ex shipping label by email and have him ship me a set of 8 on my account? pretty dumb question I guess... sure he could, but would he? I want to build 2 presses for the local shop to use... the sureloc Xpress is soo outdated for speed and ease of use. I have all the info and will likely call him in the morning. Thanks a ton for all of your information and your ingenuity!

[dwagoner]

whats the scoop with the press fingers? i need a set to finish my press and have a guy i work with that wants a set also, if theres some ordering going on im down for 2 sets just send me a PM or something THX

[Unk Bond]

whats the scoop with the press fingers? i need a set to finish my press and have a guy i work with that wants a set also, if theres some ordering going on im down for 2 sets just send me a PM or something THX

Hello

Just ordered 2 sets of fingers.

Just give Sern a call, at 800-422-4096 use this ref number.. order # 906054

[skynight]

How tall are these fingers? My Yet2gettheBig1 fingers are BARELY tall enough to press my buddies Omen due to the size of the cams. I'd like to have a set that would fit my press but be at least 1/2" taller.

[Unk Bond]

How tall are these fingers? My Yet2gettheBig1 fingers are BARELY tall enough to press my buddies Omen due to the size of the cams. I'd like to have a set that would fit my press but be at least 1/2" taller.

Same here on the ones i now have.

If some doesn't give you the high. As soon as i receive mine .I will list the height.

I went on the looks of the diagram. Hope am right. Or classified here they come

[skynight]

Same here on the ones i now have.

If some doesn't give you the high. As soon as i receive mine .I will list the height.

I went on the looks of the diagram. Hope am right. Or classified here they come

Thanks.

[Unk Bond]

Thanks.

Here is a head's up for you.
A friend of mine owns a archery shop. He found that finger ca be to straight. Not enough bend over at the top.

So now iam beginning to wonder about the ones i ordered here.

Now i believe he got his replacement set from a At member here. That goes by Walks With GI.And they worked great. I hope i spelled it right. Now its my understanding.He will no longer be making them.[ Later

[joebass]

I'm looking into getting some done that are taller. I have heard that all the new PSE's have that problem.

[skynight]

I'm looking into getting some done that are taller. I have heard that all the new PSE's have that problem.

Let us know Joe. I've bought some of your stuff before, I'd be interested. Since Yet2GettheBig1 is on hiatus, he probably won't mind if you use his finger design and make it a little taller. He always shared his design dimensions freely. They work perfectly on everything I've put in it, but the Omen cams have 1/4" or less clearance. Regular XF-HF was no problem.

[Zephhyr]

Just got off the phone with Sern,,,,,, ordered 8 fingers for $50 & $10 shipping.
Used the ref# from the other post's & it couldn't have gone smoother. He said it would take 2-3 days to get them cut & then shipping time, so I should get them sometime next week.

[AwesomeAlien]

I just tried to order 4 of those fingers and the price was $80. I can spend 2 evening with a sawsall and a grinder for that price. Price per finger was 12.58 with a plate fee and 20.00 shipping. Anyone have an extra set? Send me a PM

[05_sprcrw]

I got a manufacturing guy I use in town to outsource some parts when we can't handle the load. I got charged $68 for 16 fingers cut out of 1/2" plate. They turned out great and were held to .003" tolerance.

They are TMCO based out of Lincoln, NE.

[highside74]

I just tried to order 4 of those fingers and the price was $80. I can spend 2 evening with a sawsall and a grinder for that price. Price per finger was 12.58 with a plate fee and 20.00 shipping. Anyone have an extra set? Send me a PM

If guys would have read the whole thread and followed the order # there would have never been a problem. Some guys had to get way to many people involved and ask to many questions. Should have been an easy thing. To many phone calls to many emails for something so simple.

[bow_dmen]

I got a manufacturing guy I use in town to outsource some parts when we can't handle the load. I got charged $68 for 16 fingers cut out of 1/2" plate. They turned out great and were held to .003" tolerance.

They are TMCO based out of Lincoln, NE.

Could you get me some contact info? Just drop me a PM if you got to. I need a order number or reference number so it will be easier.

[AwesomeAlien]

If guys would have read the whole thread and followed the order # there would have never been a problem. Some guys had to get way to many people involved and ask to many questions. Should have been an easy thing. To many phone calls to many emails for something so simple.

I did what it said but I still had the middleman/woman between us.

[Unk Bond]

I did what it said but I still had the middleman/woman between us.

----------------

Hello I got her to. But ask for Sern .He's generally pretty busy. But if he can't get a hold of him. Call and ask again.

There very nice fingers. But as my shop suggested they could lean forward a little more for some bows. Or mount them. Where as you can roll them back and forth. For some bows. [ Later

[ymurf]

I work in a machine shop and am making a press.I see allot of controversy on the finger pdf in this thread.I am going to water jet me a set out but want to know if the pdf diagram will work for a Switchback or do they need to be taller or more of a angle at the top where the limbs go?
Thanks for any help on this.

[Unk Bond]

I work in a machine shop and am making a press.I see allot of controversy on the finger pdf in this thread.I am going to water jet me a set out but want to know if the pdf diagram will work for a Switchback or do they need to be taller or more of a angle at the top where the limbs go?
Thanks for any help on this.

Mine work just fine for the type bow i press. But my shop said for some bows. The fingers needed to lean a little more forward. [ Later

[wildbill3832]

bumping so that i can find it tomarrow!

[ymurf]

The fingers I cut worked great.

[rootripper]

ttt

[Texbama]

If anyone has a current source for fingers PM me please.

[Just 1 More]

If anyone has a current source for fingers PM me please.

Me too.. I need 1 finger

[Unk Bond]

If anyone has a current source for fingers PM me please.

Hello
Some one posted, on one of my threads. That fingers can be found on ebay. [Later

[neo71665]

Hello
Some one posted, on one of my threads. That fingers can be found on ebay. [Later

Last check the ebay seller wanted $60 for a set. I would personally call local metal shops and print out the template thats floating around on here. The shop I use told me he would cut 4 of them out of 1/2 inch steel for $20, add $10 for tapping 4 holes.

[Unk Bond]

Last check the ebay seller wanted $60 for a set. I would personally call local metal shops and print out the template thats floating around on here. The shop I use told me he would cut 4 of them out of 1/2 inch steel for $20, add $10 for tapping 4 holes.

Hello sorry i didn't check ebay for price. I agrre thats a little much.

[AwesomeAlien]

These turned out nice.http://www.archerytalk.com/vb/album....ictureid=45609

[bowman_77]

These turned out nice.http://www.archerytalk.com/vb/album....ictureid=45609

Did you make them, or had them made, if so please share.

[k21ram]

I was wondering why you would not want the very tips of these fingers to break over 90 deg? I would think if they broke at 90 deg you would just push your bow up into the fingers until they stop, then start squeezin? I think the answer is to keep it more "universal" for the non parallel limb bows? For a parallel limb bow 90 would be ideal. I think if I were to have some cut for myself I would cut them 90 deg at the tip for my SBXT. Am I close?

I was going to build some myself and didn't see why they could not be 90 degrees? It would seem like it would work better with a 90 degree bend on the end. Can anyone clear this up?

[easyeriq]

I was going to build some myself and didn't see why they could not be 90 degrees? It would seem like it would work better with a 90 degree bend on the end. Can anyone clear this up?

You can put them at 90 degrees, but the reason they are angled is for more room for the cams. Atleast, that's what I have been told.

[k21ram]

Thanks. I thought it would work just fine, I just didnt see anyone else doing it so i began to wonder if there was a reason for it.

[mt hunter22]

looking for some fingers whats out there

[heilman181]

Does anyone know if these fingers are still available?

[neo71665]

Does anyone know if these fingers are still available?

Prolly not, might try to PM them and see if they will make a set for you but with the way a certain company is so insecure about thinking others are gonna get rich off these and sending out threats from lawyers makers don't last long. Best thing to do would be find the fingers diagram on here and try to get them made locally.