Archery Talk Forum banner
Status
Not open for further replies.

Attn: String Makers

2M views 9K replies 819 participants last post by  wisdoll22 
#1 · (Edited)
How would all stringmakers like to start a string -cable lengths as well as serve lengths thread.
I have spoke with a few of they string makers here on AT about this ,they like it.
Please respond to this thread if you like the idea,it only helps us all out!!!
 
#247 ·
I have one more place to check and hopefully I will find something for you.
 
#248 ·
does anyone have the serving measurements for a jennings buckmaster BTR 32?

string is 103"

buss is 43"
 
#249 ·
string making problems

Been having a few complaints lately of serving separation on my strings. Have had a lot of great strings made and a few with separation problems. It's usually the part of the string that wraps around the mods. What can I do about this? Very frustrating. Thanks
 
#251 ·
Serving measurements for a Parker Phoenix 34?

Don't hav the BTR Ron, Sorry.
would the phoenix 34 be close is that what you are saying? do you have those measurements?
 
#254 ·
I will see if i have that in my files then but what I do know is I have the phoenix 34 so here it is

0 to 19 1/2"----28 1/2 to 33"----43 5/8" to 67"--------from end 10"


buss 0 to 9"
 
#255 ·
does anyone have the buckmaster 2000 PWC??????????
 
#259 ·
I need a few more, I swear I had them at one time.....but alas, had is not helping me right now. I have the string and cable lengths, I need serving locations.

Thanks in advance

Outback
Vectrix 28.5" draw
07 Guardian
07 Martin Jaguar Mag (string length is 87.5)
PSE Mach X single cam....I think this is the one that does not have the idler served???
 
#261 ·
Yip



07 GUARDIAN
56 11/16
16.25/17.5---26 7/16-30 15/16--17.5-16.25
38 1/8
7.5-----12.5

OUTBACK
90 3/8
17-19--27 3/8--32--41.5--77 1/8--9
33.75
0-6-?--11--16----9

06 PSE MACH X
96.25
18--30 1/8--34 1/8--(45--67)--10

34.75
STANDARD CABLE SERVE

07 HOYT VECTRIX 28.5
53
16--25.25--30.25--16
35.25
8-10---13
38
13---7

I have serve for a 05 martin jag. mag dyna cam
87.5
16.25-17.75--26 5/8--31 1/8--43--58.25---9
35.75
stand. serve
 
#8,503 ·
07 GUARDIAN
56 11/16
16.25/17.5---26 7/16-30 15/16--17.5-16.25
38 1/8
7.5-----12.5

OUTBACK
90 3/8
17-19--27 3/8--32--41.5--77 1/8--9
33.75
0-6-?--11--16----9

06 PSE MACH X
96.25
18--30 1/8--34 1/8--(45--67)--10

34.75
STANDARD CABLE SERVE

07 HOYT VECTRIX 28.5
53
16--25.25--30.25--16
35.25
8-10---13
38
13---7

I have serve for a 05 martin jag. mag dyna cam
87.5
16.25-17.75--26 5/8--31 1/8--43--58.25---9
35.75
stand. serve
Here ya go

Sent from my SM-G928V using Tapatalk
 
#277 ·
ttt

I need serve specs for Hoyt 38 Ultra 30in draw.
String 57.75
CC 43.25
BC 40.5
still need these,but also need to know if you build strings for Matthews Q2 to spec or build a tad short.i have all specs but am not sure on this one.I know on most Mathews you build them a tad short.
 
#281 ·
Looking for string and buss cable lengths for the Diamond Edge and I also need the string and cable lengths for the Bowtech General along with serving marks.
 
#282 ·
Spec. For 2007 Hoyt Pro-elite

hi there..

DOes anyone have the spec for 2007 hoyt pro-elite with Cam & 1/2 #1?
I want the String and serving length for strings, buss cable and control cable..

It will be the best if have the drawing which show how much the serving is...

Thank you in advance..
 
Status
Not open for further replies.
You have insufficient privileges to reply here.
Top