a href="http://www.lancasterarchery.com/archery-classic-register/#header">
Results 1 to 6 of 6

Thread: Changing draw length on a PSE Stinger

  1. #1
    Join Date
    Apr 2009
    Location
    Pennsylvania
    Posts
    4

    Changing draw length on a PSE Stinger

    I need to change the draw length on my PSE Stinger NI I understand that I have to move the set screw in the cam , my question is , when I take the set screw out will the cam have tension on it ?



  2. #2
    It shouldn't have any tension on the module that slides next to the cam.

  3. #3
    Join Date
    Aug 2005
    Location
    Manitoba
    Posts
    300
    I have changed it on my Stinger. There is no tension on the module. Don't forget to change the draw stop to match the draw length. Look at the owners manual on the Browning Archery web site. The Verado for example uses the same cam and it has much better instructions on changing draw length.
    Life is hard. Life is harder if you are stupid.

  4. #4
    Join Date
    May 2002
    Location
    Mississauga ON
    Posts
    9,064
    What they said...
    A=30", B=29", C=28", D=27" and you can go shorter but need to get a different mod from the stock one. Match the draw stop to the mod position. You might have to flip the bow over and install the draw stop from the other side for the shorter lengths.

  5. #5
    A-30"
    b-29"
    c-28"
    ...

    There are two small screws in the mod in one of the lettered markings, just be sure if you move the screws from the b position to the c position that you also move the draw stop to the corresponding marked hole (in this example the c holes (either 80 or 65%)

    Hope that helps

  6. #6
    Thanks Huntershafter! The PSE owner's guide for the Stinger doesn't even address how to change the bolts on the cam to increase the draw length! Crazy. After reading your posting it was a snap. I checked out the Browning site too which had some good diagrams. A bow shop I called wanted 20 bucks for what turned out to be 5 minutes of work! Thanks, worked great.

Similar Threads

  1. changing draw wieght changed my draw length???
    By brianhokie in forum General Archery Discussion
    Replies: 2
    Last Post: July 9th, 2010, 09:02 AM
  2. Changing Draw length
    By bowmanbill in forum General Archery Discussion
    Replies: 1
    Last Post: July 2nd, 2010, 10:38 AM
  3. Does changing draw weight change draw length
    By Bow in forum General Archery Discussion
    Replies: 3
    Last Post: September 8th, 2009, 08:49 AM
  4. Changing Draw Length ?
    By HOGGYO in forum General Archery Discussion
    Replies: 6
    Last Post: April 13th, 2007, 12:18 PM
  5. Replies: 3
    Last Post: April 3rd, 2005, 12:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •