November 20th, 2009, 08:03 PM
How do I repair a hole in LaCrosse Rubber Boots?
Got new pair of Lacrose Alphas last year and while scouting some new property the other day I got tangled in some old barbwire. Man I was sick as I cut a small slit about 1/4 inch long on the top about 2 inches from the toe. Paid like $110 for these and love them so can someone PLEASE tell me I can fix these. I thought about an old tire patch, I mean as a boy we would repair tubes so why won't it work in this case? Anyone that knows please give me some good news. Thanks!
BOWTECH Destroyer 350 10/08/10 290 fps at 65 lbs
BOWTECH Allegiance 65lb 09/15/05 270 fps at 62 lbs
NAP 360 Capture Rest, TrophyRidge Tritium Sight-1 Pin
Apex Quiver, BOWTECH Stabilizer, Tru-Peep Super size
Easton Axis 340's, GATORJAW release, (user name)
November 20th, 2009, 08:09 PM
I just did it. I actually used a piece of a bike innertube and some general purpose adhesive.
I used a rasp and roughed up the rubber. Seems ok.
However, mine is along the calf area not the foot.
November 20th, 2009, 08:14 PM
I tried ShoeGoo. Its like $4 for a tube in the Walmarket shoe dept or other shoe stores. It worked on some other shoes, but on my rubber boots it only held up for a bit. The glue appeared to get knocked off after using my climbing stand a few times. It smells real nice but for me it didn't work on rubber boots.
November 20th, 2009, 08:18 PM
Aquaseal , Fixed a rip in my 1200gram Burly boot a year or two ago and still going strong.
TEAM 39 Pass Thru Posse
29/50 AP Black Xcentric
With gorilla gone, will there be hope for man? ~ Ishmael
November 20th, 2009, 08:19 PM
November 20th, 2009, 08:23 PM
Go to LOWES or Home Depot .
Get a tube of marine or plumbers GOOP ($5.00) .Clean and ruff up around hole. Make sure you use the cone nozzle and shoot some inside.Let it leave
a little raised spot on outside. This stuff will fix ANYTHING !
November 20th, 2009, 09:23 PM
but a pair of muck fieldblazers,,, best boot Ive ever put on my feet
pse bows,,,Excalibur crossbows,,,,gold tip arrows/bolts,,,,,rage/slick trick,,,,hawke optics,,,,,scentblocker/mossy oak,,,,,b stinger,,,,,limbdriver,,,,,,,h ha sights,,,,,,,,60x strings,,,,,, scott/hot shot releases,,,,summit treestands
November 20th, 2009, 09:39 PM
That will work also...
Originally Posted by Gatorjaw
November 20th, 2009, 10:23 PM
Use a thick intertube patch or section of intertube, and glue with 3m #5200, marine adheisive. The white stuff is for faster setting, the black takes a little longer to set, but if the area is roughed up, and "clean", The repair will last longer than the rest of the boot. Ace hardware carries the adheisive, as well as most marine stores.
Enjoy life as much as you can, whenever you can....cause you never know...
By orlybow in forum Clothing, Packs, Footwear and Bow Cases
Last Post: February 24th, 2010, 11:09 PM
By CaptPete in forum Accessories and General Hunting Items
Last Post: May 26th, 2008, 02:31 PM
By arrowshlammer in forum Accessories and General Hunting Items
Last Post: September 19th, 2007, 11:47 AM
By Devilfan in forum Bowhunting and Bowhunter Showcases
Last Post: June 22nd, 2007, 01:01 PM