May 8th, 2010, 11:52 PM
What is the best rest for a Mathews Monster
I have a Mathews Monster and have a QAD ultra rest pro and can't seem to get away from fletching contact. My arrows seem to be flying really good but am getting a left tear when I paper tune. It shows that i am hitting my right hand arm on my launcher. What do you guys think?
May 9th, 2010, 12:08 AM
May 9th, 2010, 12:15 AM
2012 Bear Anarchy Shadow, Hha, Limbdriver.
2014 Bear Anarchy Shadow HC. TT smackdown pro, hha
May 9th, 2010, 12:23 AM
Shooting 315 out of my M6 with fusions and that same rest with no problems. Try some spray-on foot powder to make sure and also make sure it's timed correctly....if all thats good, send it back.
May 9th, 2010, 12:26 AM
My buddie's M6, and my XLR8 both have Qad HDs, and they work fine. Are you using the TL1 launcher?
May 9th, 2010, 12:57 AM
I honestly think you should try the down force on it. I set it up on my 7.0 and it's tuned great, quick and very easy. I too had some problems running a QAD rest on my monster, just a suggestion
May 9th, 2010, 01:18 AM
Trophy Taker- Shaky Hunter is an AWESOME Drop away
May 9th, 2010, 01:36 AM
for sure it would b the matthew downforce rest, works awesome!!!!!!!!!!!!
May 9th, 2010, 01:37 AM
dont use the qad on it , wont stay tuned!!!!!!!!!!!
May 9th, 2010, 02:25 AM
My QAD works fine so far on my Monster.
May 9th, 2010, 08:32 AM
Interesting!? Hmmmm, why not? Is the Earth's gravitational pull over riding the timing cord? I have a QAD hd on my Monster 6 and have no problems with timing or contact. I've also had the G5 expert II on it and had no issues either. It doesn't matter what type of rest you use if you don't set it up correctly. JMO
Originally Posted by chuckrozasrn
May 9th, 2010, 09:22 AM
I had contact with blazers and my ripcord code red on my M7. I had the problem when i had the arrows nocked cock vane right and solved the problem when i rotated my nocks and put the cock vane straight up even with the string.
Maybe that will help, easy try and fix if it does
May 9th, 2010, 12:59 PM
May 9th, 2010, 01:11 PM
im using a ripcord code red on my xlr8 and LOVE IT
May 9th, 2010, 01:12 PM
Originally Posted by monster_7.0
I had the same problem, just shoot cock feather up now and zero problems.
May 9th, 2010, 02:03 PM
x3 Limb Driver
Originally Posted by electricg2
May 9th, 2010, 02:12 PM
Stay FAR FAR away from the Limbdriver unless you like flimsy rests that can bend with a slight breeze (okay, a little exagerated but not much). Contrary to everyone else's opinion, the long cord was a HUGE problem for me both for hunting and target and that flimsy rest was way too easily bent. I used it for a year and switched to a DownFOrce and will never go back.
May 9th, 2010, 02:43 PM
Limb Driver on my last 3 and 2 of my current bows, also one on my 12 y.o. sons bow. Never one problem, launcher arm is supposed to be flexible. Lots of great drop aways out there, to each his own.
May 9th, 2010, 03:09 PM
May 9th, 2010, 03:10 PM
I switched out my QAD Ultra Pro with a Schaffer Opposition Rest. I really like how it performs.
Vengeance, ATX Driver, QAD HDx, Stingray Stabilizer, Mothwing Winter Mimicry
Knightmare, ATX Driver, Limbdriver Pro-V, Axion Stabilizer, Black
By jacknife in forum General Archery Discussion
Last Post: July 11th, 2010, 04:54 PM
By D45 in forum General Archery Discussion
Last Post: March 14th, 2010, 01:36 AM
By str_8_shot in forum General Archery Discussion
Last Post: July 31st, 2009, 11:54 AM
By 24Bowhunter in forum General Archery Discussion
Last Post: May 13th, 2009, 04:57 PM
By bigbuckdown1975 in forum General Archery Discussion
Last Post: April 8th, 2009, 10:46 PM