Archery Talk Forum banner

scope fiber?

439 views 4 replies 5 participants last post by  48archer 
#1 ·
Ok new to 3d and spot set up side of things I got a bow with cbe sight set up and there was a pin in the box no fiber I bought a gold fiber put the end to a flame quickly the flare it out put it together worked well a screw came a little loose in the scope and I bumped the fiber pulling it through my carelessness ok so I take it back apart and repeat the process the first time fiber was bright worked well 2nd time very dull so I snipped it did it again worked a little better but not much what is the best way to flare the end for the pin to hold in place and retain a bright fiber size .10 fiber second question I seem to be getting a double pin when im trying to aim reason for this? I shoot one eye open thanks
 
#3 ·
Ditto.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top