May 21st, 2013, 10:30 PM
yes I think the bow is awesome and I'm glad the cams aren't hitting your strings.
May 21st, 2013, 11:26 PM
I'm a bit confused. Can you detail what you mean by the string is hitting the cam where the cables attach?
Originally Posted by 206313 Alien
Is this at rest or at full draw?
Can you post a pic of this?
Advantage Custom Strings
Black Eagle Arrows
May 22nd, 2013, 02:22 PM
Originally Posted by 206313 Alien
I was shooting my Alien last night and I remember what you had said. Then I looked at my cams and noticed my top cam mods don't touch but my bottom cam and cable slightly touching the module, is this what your stating?
If so I was told its normal, there is NO wear of the serving or cable, it is so minor I can slide a paper thru the gap with little resistance.
I have no worries about it, but its good you noticed it because I didn't.
The bow performs flawlessly, I'll be putting on a new sight on it soon...a spot hogg, "hogg-it" seven pin on my Alien.
May 22nd, 2013, 11:14 PM
Well I'm trying to figure it out myself I gave my bow to a young man I have known all his life, he has alot of knowledge about bows, he talked me into changing to custom strings. He felt something wasn't quite right and he noticed the string touching the cam so darned if he didn't go ahead and take it back to where I bought the bow,so I haven't seen it ,still waiting to hear from the retailer. when he took the bow in they got another Alien out and it was doing the same thing so maybe it is normal but anything rubbing can't be good can it.
May 22nd, 2013, 11:34 PM
So now i'm wondering if this is common to the nitro cam
May 23rd, 2013, 10:54 AM
my scepter V and old silencer had the same issue with the cable rubbing the side of the mod. my buddy had the same issue with his firecat as well. although this has seemed to be a regular issue it doesnt seem to result in a big problem. my suggestion would be check to make sure that the mod is not clipping the cable when the bow is let down. if so make sure the cables are to the length of specs, check that regularly due to cable stretch. if that keeps the mod from clipping the cable you would be good if not my next suggestion would be gettig a custom string set and have the least amount of strands as possible while still sticking within the materials suggested strand counts and go with a slightly thinner and stronger serving.
May 23rd, 2013, 11:45 AM
Here is a pic of my bottom cam, I tried to take a top pic of the cam and the module but didn't look good couldn't see anything. you can see a side view of the bottom Alien cam. Like I said I was told its normal and nothing to be concerned with its how it was designed I guess, the pic is of the bow at rest but when its at draw I believe it don't touch. A gap is there.... that I can slide a paper within the gap. You can notice there is no serving wear and I shoot a lot.
May 23rd, 2013, 12:01 PM
if you can slip paper between the mod and cable than you will be fine. martin is trying to keep tolerances as tight as possible. the shorter bows such as the alien, onza, prowler, etc. dont seem to have as severe of an issue with this because the angles created by the cable guide and shorter A to A keep that cable pulled away a little more that the longer A to A bows
May 23rd, 2013, 01:27 PM
Yeah I'm not concerned with it, once I was told that's the way it is that's it, I got no problem with the bow....shoots fine. I'm shooting out to 80 yards with my Alien and seven deadly pins spot hogg. I'm switching it out for a hogg-it 7 pin. Putting 7 deadly on another bow I'm getting. I hope that onza 3 I want is still there!
May 23rd, 2013, 10:23 PM
i would be to concerned either. as long as it tunes and every thing is in good working order any bow will shoot well with no issues. ifbyou change elovations or as we move more into summer and temps rise i would check it quickly do to affects on the string but with that much room you shouldnt have any issues
May 25th, 2013, 12:43 AM
I guess they are sending it back to Martin Archery to let them have a look, like I said I didn`t see it but I trust the young man and he believes there is a problem hope it doesn`t take long
May 28th, 2013, 04:02 PM
Well let me know what happens. show some pics!
July 8th, 2014, 11:02 PM
I'm thinking of buying a '13 Alien....from the reviews I have read its a good bow and the YouTube vids I've seen show that its damn near noiseless...and it looks awesome and from my research I can pick one up for pretty cheap....is the bow worth it???? Is it fun to shoot???