Archery Talk Forum banner

What Spine for DST 60lb?

1K views 9 replies 5 participants last post by  Smackspank 
#1 ·
27.5 arrow length from knock to carbon. 28.5 DL (AMO)
 
#7 ·
You're good, I did have the tips backwards. Didn't realize, till you mentioned it.
Are you guys using a fixed rest. I barely got a hamskea to work, due to the small space between the Berger hole and shelf. I even had to go to 1.5 x vanes to get clearance between the cables and shelf.
 
#8 ·
You will aways get a stiffer spine to work best. I would recomend a 400,350 spine. 100-150 gr point. If I where to recomend a drop away rest it would be a Vapor trail Pro V.All of OK staff shooters use blade rest. The reason for this is its simple and trouble free and if you make any changes the cables do not effect the Rest or drop rate. Cable spreaders are availible through OK dealers these offer clearence for higher profile vanes or feathers. Visit www.balegend.com .
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top