Archery Talk Forum banner

Measuring arrow length for spine chart?

549 views 2 replies 3 participants last post by  field14 
#1 ·
When measuring the arrow for proper spine do you measure the arrow from the nock throat to the tip of the insert or from carbon to carbon?
 
#3 ·
Carbon to carbon for proper "Shaft length". Be advised, however that by design, the charts run "stiff". It helps with liability concerns. Those charts are a "guide" and NOT gospel as to what will work the best with your setup. There are too many variables involved for a guide selection chart to get things perfect.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top