I tried to adjust the draw length of my new Carbon Knight. I downloaded the 2013 owners manual from the BOWTECH web site (see page attached). The Module and Post setting chart says that if Module Position is 4 the Post Setting is 7. That did not work. The post needs to be at at least 4 for there to be any let off. I wrote to BT and here is their response:
Good morning, thanks for contacting us. I apologize. The chart in the manual is a typo and incorrect. The post will be set in the same position as the mod. I.E. the mod in 4, the post goes in 4, etc. Again, I apologize for the error. Let us know if you have any other questions. Thank you, have a good day.
Bowtech Customer Service/Technical Support
Thought this might help.