June 12th, 2014, 01:17 AM
side plates for rpm 360
Has anybody removed factory grip on rpm and put just side plates on and what do you think, or put whole new grip on. Loved my insanity slim line grip?
June 12th, 2014, 01:32 AM
Yah, I made side plates out of some oak. If you want professional work, contact Rattler.
God is good!
June 12th, 2014, 07:30 AM
Rattler did mine love the bow with side plates
June 23rd, 2014, 08:29 PM
Awesome looking and feels awesome as well...Rattler does a fantastic job.
June 25th, 2014, 03:55 PM
How did y'all get your factory grip off? I'm thinking about getting a set from rattler.
June 25th, 2014, 04:24 PM
Love that antler grip, looks great!
2015 Bowtech Prodigy (on order) - Spot Hogg, Real Deal, Pro V, Gold Tip Pro Hunter
2014 Bowtech CPXL- HHA OL 5010, Pro V, Gold Tip Pro 22's
"My biggest fear is when im dead and gone, that my wife will sell my archery gear for what I told her I paid for everything."
June 25th, 2014, 04:25 PM
Yup I like the antler one too
June 25th, 2014, 06:22 PM
Just rip the stickers off, screws are under those.
Originally Posted by NJlungbuster
June 25th, 2014, 06:23 PM
June 25th, 2014, 08:03 PM
Rattler side plates.. Fit and finish are fantastic
Excalibur Micro Nightmare, Excalibur Matrix 405....?
June 25th, 2014, 09:59 PM
Originally Posted by JRHOADES20
What a difference in shooting. I'm a happy shooter...
June 26th, 2014, 11:58 PM
So I'm planning on getting an rpm 360, and will more than likely get some side plates. Everyone's recommending rattler so a few questions on that. I notice that the side plates y'all have are the ones that aren't bolted in? It says double sided tape for those? Do they stick on good do they seem to move at all or maybe after a while move or slide? I'd be weary to get a set that wasn't bolted in, but I like the swirls and he said that with swirls probably shouldn't get bolt in ones.
Do they make the grip slimmer or should I go for the strike plates like he says since I mainly shoot 3d? What's the difference? Currently I shoot a Hoyt carbon matrix g3 with the grip removed, and just tape wrapped. Could I maybe just wrap the rpm 360 with athletic tape and it be comfortable?
I know a lot to ask.... But thanks!
June 27th, 2014, 09:33 AM
I've been shooting my RPM everyday since putting the Rattler antler side plates on and thru haven't moved yet. Granted I'm not shooting in the resin or snow right now but they're on there.
June 27th, 2014, 09:58 AM
I'm not shooting in the rain or snow. Dam auto correct..
June 27th, 2014, 11:39 AM
bow pics 4 003.jpg Heres a pic at my grips love them shoot a lot better with them on
Bowtech Invasion 28/70 Dipped in green Skulls ,CRACKERS TUNED Bowtech rpm 29/71 372 grain at 340fps black ops,spothogg hoggfather sight ,QAD rest,Tightspot quiver
June 28th, 2014, 02:50 PM
you got any pics off the old grip with the stickers removed ? I'm a little Leary of ripping them off !
Originally Posted by jeezus
June 28th, 2014, 11:36 PM
Haha thanks... I won't be shooting in resin or snow either! What's the riser like under the original grips? Could I get away with tape? I do that now on my matrix.
Originally Posted by rjoy90
June 28th, 2014, 11:37 PM
Originally Posted by Doebuster
June 29th, 2014, 12:01 AM
Pics with the factory grip removed. I don't have pics of the Bowtech sticker removed. Just like others have posted simply pry them off to expose the screws that hold the grip on.
June 29th, 2014, 08:23 AM
Cool thanks. Probably can't get away with just tape then. I'm thinking maybe the strike plates would work better for me through rattler since I like a thin grip
June 29th, 2014, 08:47 AM
Since it seems like everyone has posted theirs, I will post mine.
Bowtech Fanatic Black Onyx --- Bowtech RPM360 Stormy Original
Black X 30"/12" --- Carbofast X-tinct 11.5"/8"
Easton Full Bore 350 --- Easton A/C/C Pro Hunter 300
Limb Driver Micro Elite --- Ripcord Code Red
Axcel Achieve 9" --- Axcel Armortech Pro
June 30th, 2014, 12:11 PM
Been shooting "bare" while waiting for my carbon side plates, you dont really touch those parts, so it works good without any, at least for me. Thou, the plates make it look so much better.
Originally Posted by HoytVicxenBabe
June 30th, 2014, 09:33 PM
Rattler made some for me. It is great.
June 30th, 2014, 09:39 PM
Torqueless also makes them now
July 1st, 2014, 02:57 AM
Nice!! I want to order some can you tell me what color that is.