August 8th, 2010, 08:06 AM
Isaiah 6:8 Then I heard the voice of the Lord saying, "Whom shall I send? And
who will go for us?" And I said, "Here am I. Send me!"[/COLOR][/SIZE][/FONT]
August 15th, 2010, 11:26 AM
My pro X Press plans are free on my website.
September 13th, 2010, 02:19 PM
could you email me the plans for the bow press at email@example.com
November 30th, 2010, 03:08 PM
I might be interested if i could use this to press the new Z7 extreme, I have an apple bow press that i am going to have to sell becasue i cannot press this bow thsi looks like if could work. firstname.lastname@example.org
September 10th, 2011, 12:13 PM
October 16th, 2011, 02:30 PM
Could you please send me a copy of your press plans?
Sent from my ADR6400L using Tapatalk
October 28th, 2011, 02:19 PM
December 5th, 2011, 01:51 PM
Does this press work on split limb bows?
December 17th, 2011, 05:23 PM
These are the plans for the press from Tom, then another that he also wanted me to share here, not sure who did those though.
Also, please send me more pdfs if you want me to host them to post too. Though accepting them is for me to decide.
For the Plans: http://www.webow.com/Bow Press Plans.pdf and http://www.webow.com/Bow Press X-Pre...th Welding.pdf Enjoy,
Elite Archery E35 50# 28" / CX Medallion Pro 650 / Select Archery Peep
January 18th, 2012, 04:13 PM
where can i get the plans for this at
Originally Posted by wheels3563
February 25th, 2012, 04:04 PM
Do you think this press will work for split limb bows? I have a new hoyt vector 32 that I would be using it on. thanks
March 3rd, 2012, 07:43 PM
Will any of these work with the newer parallel or past parallel bows? A friend wanted me to build him the press posted by Midlife Crisis for his PSE Bow Madness, but I have my doubts if it will work with his bow? Any one know for sure? Tks.
March 6th, 2012, 07:20 AM
November 12th, 2012, 01:40 AM
great work!!! very good to read about it. thanks
February 17th, 2013, 10:25 PM
yes i wou;d love to have more info to build this press can email it to me at email@example.com
June 7th, 2013, 10:15 AM
Foam~"The Patriot"Hoyt Contender Spots/Field/ASA~Hoyt Contender Hunting~Mathews DXTTru-Ball\Axcel ~ Black Eagle Arrows
Trophy Taker ~ Center Circle Strings ~ Mid-Thumb Bowmen
May 13th, 2014, 01:15 PM
Just made this, it needs a paint job but it works great!!!Bow Press.jpg
Hoyt Spyder 34 - QAD HDX - CBE. Snyper Pro - Black Eagle Carnivores
Hoyt Vector Turbo - QAD HDX - Copper John Dead Nuts - Victory X Ringer HV1
Hoyt Faktor 34 - QAD HDX - CBE Qaud Lite 3D - Victory X-ringer HV1
September 29th, 2014, 04:04 PM
Most of the presses I saw in this thread are antiquated and don't work nearly as well on the newer parallel limb bows. take a look at these presses as well.
This is the one I built it can be built with normal wood working tools and requires no welding. you can get full build instructions here:
Other inline bow press threads can be found here
THe Slimline inline (most popular):
Pipe Clamp Bow Press:
Rope Pulley Press
Become a string maker but don't waste your time wrapping your servings by hand check out the NWSpinner!
Teach a kid archery, you'll be rewarded with a lifetime of smiles!
By Tunaboy in forum General Archery Discussion
Last Post: April 26th, 2009, 11:14 PM
By baldbear2009 in forum DIY Equipment
Last Post: February 3rd, 2009, 03:09 PM
By sbui in forum General Archery Discussion
Last Post: March 7th, 2008, 04:03 PM
By archer2090 in forum General Archery Discussion
Last Post: January 31st, 2008, 07:04 PM
By bevins587 in forum General Archery Discussion
Last Post: May 23rd, 2007, 08:41 AM