June 22nd, 2014, 09:55 AM
Martin Bows and Saunders Hyper Glide
I have a Saunders Hyper Glide on my Elite 35 and really like it. I did need to adjust the cable rod (the E35 has a bent rod) slightly since the Saunders was pulling the cables closer to the rod (compared to the original slide).
I've read a few threads that say the additional pulling on the cables (between the Saunders and a straight cable rod) could cause cam lean.
I just ordered a Saunders for my Pantera and wanted to see who here might be using one. If so, have you had any issues with the Saunders and a straight cable guide?
June 22nd, 2014, 12:50 PM
My bro has one on his and I just got one for my onza and I like it works great
2013 Onza XT w Barnesdale limbs
2012 Martin Cougar Fc Pro Nitro 2 Cams
2011 Martin Ridge Hunter w/ Nitro 3 Cams
2006 Martin Cougar Se Dyna Cams
Love bows and everthing bout bowhunting!!
June 22nd, 2014, 08:00 PM
First thing that goes on any bow I pick up with a rod/slide
2014 Martin Lithium :: 2007 Martin Cheetah :: Jaguar Take-Down
Bow String Depot :: Real Avid :: Bucks and Beards Scents :: HAWK Treestands
June 22nd, 2014, 10:15 PM
Thanks for your responses and I agree, the Saunders is a great addition to any bow.
So no concerns with the straight cable rod / Saunders creating too much tension on the cables?
June 22nd, 2014, 10:47 PM
are these slides really that much better than a normal slide?
Smarten up and Martin up
June 25th, 2014, 10:28 PM
YES, YES, YES. the fifteen bucks you spend gets you better clearance for hi-profile vanes and seems to add about 5fps with my cougar and onza 3
June 25th, 2014, 10:31 PM
Definately recommend hyper glide and yes you should check cam lean, at full draw, and center shot after installing. Remember, if you change one little thing with your bow setup, it will change other little things.
Originally Posted by AJR576
June 26th, 2014, 07:47 AM
have them on both my onza 3 and saber. very nice.
2014 Obsession Phoenix
2012 Martin Onza 3
2011 Martin Saber
July 2nd, 2014, 10:55 PM
If I switch from the roller guard to this system will the draw weight stay the same? From what I understand I would loose draw weight if I dumped the roller guard and went to a rod.
Living like Christ is impossible for Man,
Living as a Disciple,,, I can do that
July 2nd, 2014, 11:08 PM
you will loose seven pounds on average with the conversion.
Owner Prairie archery
July 3rd, 2014, 12:56 PM
all my cable slides bows have them, as for the CCS works to good for me on my Alien and Alien x to convert plus I like the extra pounds, I like watching ppl who want to shoot my bow and can't pull it back HA HA.