RPM quiver suggestions

       

Results 1 to 19 of 19

Thread: RPM quiver suggestions

  1. #1

    RPM quiver suggestions

    Need a quiver and I'm really wanting a riser mount. Putting it on a black RPM360 with an HHA optimizer sight. Anybody have experience with the Tree Limb quivers? Thanks!

  2. #2
    Join Date
    Jul 2013
    Location
    Georgia,USA
    Posts
    299
    I use the treelimb riser mount on my tightspot quiver.
    I also cut the rods down to make the quiver shorter.
    Works great with HHA sights.

  3. #3
    Quote Originally Posted by GFL View Post
    I use the treelimb riser mount on my tightspot quiver.
    I also cut the rods down to make the quiver shorter.
    Works great with HHA sights.
    I like that a lot!



    Here's what I've got, but now very interested in cutting it down. What mount did you use?
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  4. #4
    Join Date
    Jul 2013
    Location
    Georgia,USA
    Posts
    299
    Your tightspot quiver bracket mounts to the treelimb riser mount.

  5. #5
    Quote Originally Posted by GFL View Post
    Your tightspot quiver bracket mounts to the treelimb riser mount.
    Yeah thanks I was just checking out their website. How'd you shorten your quiver? What'd you do about the glue?
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  6. #6
    Join Date
    Jul 2013
    Location
    Georgia,USA
    Posts
    299
    I cut the rounds with a hacksaw first,then take pliers and remove the lower bracket by twisting.
    I then glued the rods back in the bracket with epoxy.

  7. #7
    Join Date
    Jul 2013
    Location
    Georgia,USA
    Posts
    299
    I also use a rubber GearTie wrapped around the back of the rods for hanging.

  8. #8
    Join Date
    Sep 2013
    Location
    hawaii
    Posts
    1,463
    its an insanity but you can also see how the treelimb riser mount works with a tightspot and a slider. i had to cant it a little bit for my slider but still balances well

    20140622_142836_resized.jpg
    2013 Bowtech Experience
    2012 Martin Onza 3

  9. #9
    Quote Originally Posted by GFL View Post
    I cut the rounds with a hacksaw first,then take pliers and remove the lower bracket by twisting.
    I then glued the rods back in the bracket with epoxy.
    GLF, thanks bud! Trimmed about 6" off.

    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  10. #10
    What's the benefit of a shorter tightspot? Arrows are the same length so your not saving space?
    2015 Bowtech Prodigy - Spot Hogg, Real Deal, Pro V, Gold Tip Pro Hunter
    2014 Bowtech CPXL- HHA OL 5010, Pro V, Gold Tip Pro 22's

    "My biggest fear is when im dead and gone, that my wife will sell my archery gear for what I told her I paid for everything."

  11. #11
    1 once lighter. Lol
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  12. #12
    The bottom (gripper) was in the way of where the QAD cord was served in and I couldn't get the quiver in as tight as I wanted.

    Alway wanted it shorter but I wasn't gunna start hacking up my $130 quiver until I saw that someone else did it. Ha ha
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  13. #13
    Thanks, guys!

  14. #14
    Join Date
    Jul 2013
    Location
    Georgia,USA
    Posts
    299
    It makes it easier to pull out an arrow if you hang it in a tree.

  15. #15
    Here's my newest creation. 1/4" carbon fiber bracket.
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  16. #16
    Join Date
    Dec 2011
    Location
    Central PA
    Posts
    493
    Really liking the custom work.

    2015 Bowtech Fanatic 60.6 lbs 29" dl 314 grn. Black Eagle PS23's at 305 fps.
    2011 Bowtech Specialist 60 lbs. 29" dl
    2013 Bowtech Insanity CPXL 65 lbs. 29" dl


  17. #17
    Quote Originally Posted by GGFerrier View Post
    Here's my newest creation. 1/4" carbon fiber bracket.
    If I recall you or someone else was making the Carbon Fiber bracket to replace the Aluminum bracket?

  18. #18
    Quote Originally Posted by Browtinehunter View Post
    If I recall you or someone else was making the Carbon Fiber bracket to replace the Aluminum bracket?
    Yes I make them.
    Mathews HTR 70/29.5 / Axcel Accutouch Pro / Mathews QAD / Tight Spot / Black Eagle Arrows / Solid Legend

  19. #19
    Can you make me one ?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •