June 27th, 2014, 08:30 PM
What's the best way to stop the string stop rubbers from spinning on the carbon rods? When I am shooting they spin up, the carbon rods are not moving just the rubbers are. Thanks, Tim.
Live 4 today!!!
Hoyt Carbon Spyder30, 66lbs, 28 Draw, Hoyt QAD HDX, AXT Driver 1 pin, Dead Center Stab
June 27th, 2014, 11:03 PM
You might try a thin layer of double sided tape. And, some folks put a drop of glue on the post.
Bear Staff Shooter
Target bow: Anarchy HC. Hunting bow: Agenda 6.
Traditional bows: Super Kodiak and AuSable
June 28th, 2014, 01:37 AM
I use glue on my
Originally Posted by pwyrick
Bear Anarchy HC/ QAD HDX/ Cypher 5 micro on the way
Bear Agenda 7 / QAD HDX /HHA OL5510 / trophy ridge Static 9/ Maxima Red 350
Bear Venue / QAD ultra pro HD / HHA OL5510 / trophy ridge static 6 / Gold tip XT hunter
Bar Legion /QAD ultra Pro HD /trophy ridge pursuit / Easton flatline surgical
June 28th, 2014, 05:30 AM
VEGETARIAN. - Ancient tribal slang for village idiot that can't hunt or fish.
July 7th, 2014, 08:41 AM
Mine was doing the same. Stopped in a pro shop I frequent and they gave me some Easton arrow insert epoxy that cures in 24 hrs. They end up throwing it away and never use it because everyone wants they're arrows right away. Works great and dries clear.