Bomar draw stops for OD Binary Bowtech's

&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp&nbsp

Page 1 of 7 1 2 3 ... LastLast
Results 1 to 25 of 163
  1. #1
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748

    Bomar draw stops for OD Binary Bowtech's

    I've seen quite a few guy's looking for these stops and I have a thread in the "strings and cams" section but I thought it'd be easier to find here. These stops are a must have for anybody who owns an OD Binary cam'd Bowtech and likes a super solid back wall. These will take the CPX bows and make them feel like limb stops.

    They are also great on the Destroyer's and Carbon Overdrive's, these bows have a little less cable load so the back wall is a little "softer" than the CPX bows but the Bomar's make a huge difference on them.

    These stops are anodized black and will come with the appropriate hardware and a piece of foam to silence them when they hit the cables.

    $35 tyd for a pair of two with the appropriate hardware and foam tape.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  2. #2
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Here's some pictures for guys who haven't seen them. They really are a great product and definitely works as advertised.

    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  3. #3
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    318
    I have these on my CPXL, Invasion and Experience....great addition. What is the purpose of the foam on the face of the stop, mine don't seem to make any noise as they sit.

    LC

  4. #4
    Join Date
    Mar 2014
    Location
    Beulah Michigan
    Posts
    2,886
    They make a noise on my 360, but not enough for me to worry about. My biggest complaint is sometimes they can be a spin to sit flush.
    Bowtech Fanatic 2.0 [32 Cam] 50# Ano-Green @ 28.5"
    Bowtech Boss 60# Black Ops @ 28.5"

  5. #5
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    The foam eliminates any "click" or noise from the stops hitting the cables. Some bows will have a slight tick so the foam eliminates that.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  6. #6
    Join Date
    Apr 2014
    Location
    Colorado
    Posts
    270
    Can I gift you a paypal for a set?

  7. #7
    Got mine in the mail today for my RPM. Thanks Tony... I installed as per instructions but fine tuned them on the draw board... What a different feel with a super solid wall. The bow aims so much better, however I feel I've lost just a wee bit of either draw length and letoff.. Has anyone else noticed this?
    Excalibur Matrix 380, Excalibur Micro Nightmare x 2, ....?
    Ramcats,Magnus Black Hornet's

  8. #8
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    318
    Make sure you are perfectly timed...I did notice this similar feel as well, it was more apparent when the bow was not timed correctly.

    LC

  9. #9
    Quote Originally Posted by Lefty-Canuck View Post
    Make sure you are perfectly timed...I did notice this similar feel as well, it was more apparent when the bow was not timed correctly.

    LC
    Lefty, thanks,

    I've got them timed as best I can. They are hitting the cables at the same time and bare shaft through paper perfectly. Thinking back, The stops make the bow at full draw almost feel like my Specialist did.. I will continue to fine tune them over the next several days. It's not a bad feeling just different.
    Excalibur Matrix 380, Excalibur Micro Nightmare x 2, ....?
    Ramcats,Magnus Black Hornet's

  10. #10
    Join Date
    Feb 2011
    Location
    Edmonton Alberta
    Posts
    318
    If you compare the Bomar to what you had before they are a little bit thicker, have more surface area, and they do not have the rubber coating on them, so they do feel different.

    Once you get used to them you will never have an OD cam system without them...

    LC

  11. #11
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Quote Originally Posted by #40Fan View Post
    Can I gift you a paypal for a set?
    Sure thing. PM me for the PayPal info.

    Quote Originally Posted by "Own More Bone" View Post
    Got mine in the mail today for my RPM. Thanks Tony... I installed as per instructions but fine tuned them on the draw board... What a different feel with a super solid wall. The bow aims so much better, however I feel I've lost just a wee bit of either draw length and letoff.. Has anyone else noticed this?
    The Bomar stops are thicker than the stock pegs, they will shorten draw length appx 1/16"-1/8" and increase holding weight a couple pounds.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  12. #12
    Do these lock down good, or do they occasionally come loose and spin?
    2015 Bowtech Prodigy - Spot Hogg Hunter, Pro V, Gold Tip Pro Hunter

    "My biggest fear is when im dead and gone, that my wife will sell my archery gear for what I told her I paid for everything."

  13. #13
    Join Date
    Mar 2014
    Location
    Beulah Michigan
    Posts
    2,886
    Quote Originally Posted by JRHOADES20 View Post
    Do these lock down good, or do they occasionally come loose and spin?
    Haven't shot much with mine, but they seem to stay put. A little blue loctite would not hurt I don't think. If I ever need to adjust mine I plan on using some.
    Bowtech Fanatic 2.0 [32 Cam] 50# Ano-Green @ 28.5"
    Bowtech Boss 60# Black Ops @ 28.5"

  14. #14
    Join Date
    May 2008
    Location
    Bluefield W.V.
    Posts
    1,112
    Quote Originally Posted by JRHOADES20 View Post
    Do these lock down good, or do they occasionally come loose and spin?
    I've had the Bomar stops on 3 different bows in the past and never had them move by themselves. I do pull hard into stops during my shot. Should be no issue with them moving.

  15. #15
    Good to know, thanks for the replies.
    2015 Bowtech Prodigy - Spot Hogg Hunter, Pro V, Gold Tip Pro Hunter

    "My biggest fear is when im dead and gone, that my wife will sell my archery gear for what I told her I paid for everything."

  16. #16
    Tony, would you recommend moving the stops one peg longer or twist up the cables a bit to get the draw length back?
    Excalibur Matrix 380, Excalibur Micro Nightmare x 2, ....?
    Ramcats,Magnus Black Hornet's

  17. #17
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Quote Originally Posted by "Own More Bone" View Post
    Tony, would you recommend moving the stops one peg longer or twist up the cables a bit to get the draw length back?
    I'd tweak the cables personally.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  18. #18
    Quote Originally Posted by Tony219er View Post
    I'd tweak the cables personally.
    Thanks Tony, will do...

    BTW sending payment for another set for my Experience..
    Excalibur Matrix 380, Excalibur Micro Nightmare x 2, ....?
    Ramcats,Magnus Black Hornet's

  19. #19
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Quote Originally Posted by "Own More Bone" View Post
    Thanks Tony, will do...

    BTW sending payment for another set for my Experience..
    No problem. Thanks for the orders everyone. I'm running out quick but will be placing another order this week, if anyone wants PSE or Hoyt stops let me know and I'll add them to the next order.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  20. #20
    Do you ship to Norway?

  21. #21
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Quote Originally Posted by Decathlon View Post
    Do you ship to Norway?
    I never have so I don't know what shipping costs would be?
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

  22. #22
    Join Date
    Feb 2013
    Location
    Norway
    Posts
    76
    I picked up some bomars for my bowtechs, will never go back to regular stops!
    Bowtech Experience Black Ops 65# 29"
    Bowtech Carbon Overdrive 65# 29"
    CBE sights and Smackdown rests
    Bloodsport and Easton arrows

  23. #23
    Join Date
    Dec 2013
    Location
    perry county, PA
    Posts
    124
    $35 shipped to PA?

  24. #24
    I put mine on a while back but did have to adjust my DL. they also made a click noise which I didn't like but eliminated with some mole skin.
    Made a very solid back wall on my bow

  25. #25
    Join Date
    Aug 2011
    Location
    Crown Point, IN
    Posts
    10,748
    Quote Originally Posted by pcbowjunky View Post
    $35 shipped to PA?
    Yes sir.
    Click here to view endless pictures of custom bows and bowstrings
    www.bowfitters.net
    219-775-8446

Page 1 of 7 1 2 3 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •