June 30th, 2014, 08:16 PM
RPM 360 Draw length and poundage
I am looking at an rpm and am curious about the poundage I should go with. I have a muscular build so I am strong so that is not an issue, but I keep hearing that the rpm is even more manageable at smaller draw lengths. I draw 26 inches so that is rather small, so would 70# limbs maxed out be a reasonable thing for me to get? (In comparison I am currently shooting an old PSE firestorm lite at around 65-68#)
June 30th, 2014, 11:13 PM
Mine is a 70# but is maxed out at 73.8 from the factory.
Bowtech RPM360 - 73.8# @ 29" / HHA Kingpin / AXT Recon / Tight Spot / Black Eagle / Tony219er custom threads
July 1st, 2014, 12:49 AM
Id say pull whatever you mormally pull. The draw cycle probably rocks at 26"... Because it becomes super smooth as soon as 29".
But youd have to get the 70# limbs in order to get the range you normally pull.
2014 Bowtech RPM 360, 60#, Stormy Hardwoods BloodTrail Fade
2011 Bowtech Specialist, 60#, Black Ops (Soon to receive an Ultimate Finish! )
July 1st, 2014, 12:56 AM
Going to shoot it tomorrow to get a feel for it