June 30th, 2014, 10:05 PM
Old School Admiral Question
Would someone direct me to a thread that discusses draw length adjustment for an '08 Admiral. I'm having a terrible time finding any information and the Bowtech Factory Catalog is about as helpful as you know what on a boar hog. Thanks and have a great day.
June 30th, 2014, 10:19 PM
It might help the admiral was a 09 not 08. I think i have the book that came with the bow.
BLACK CARBON OVERDRIVE
SUMMIT VIPER ELITE SD
June 30th, 2014, 10:24 PM
Now that's embarassing! You are right. '09. Everything I've read says to remove the 3 set screws from the cam and then rotate it to where you want it. Mine won't budge; can't get it to rotate at all. I figured there was a secret I had missed out on. Or I wonder if it is siezed up?
June 30th, 2014, 10:45 PM
Not an expert, but I would say that if you have removed the three screws from the draw mod and it won't rotate, you need to apply a force to break loose the module from he cam. My modules were stuck to the cams as well. I would be very careful so as not to scratch anything, but tapping on the back side of the module should free it up.
June 30th, 2014, 11:45 PM
That worked great. A few taps and out they popped. It was almost like Bowtech put something in there to seal it up. Anyway, thanks for the tip.