Results 1 to 18 of 18

Thread: New build for one of our members

  1. #1
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254

    New build for one of our members

    An AT member contacted me last week and asked me to do a build for him but was not exactly sure which setup might best fill his needs. His primary requirements were flash range and picture quality, as well as good battery life in the field. After a few pms were exchanged he eventually left it up to me to choose which camera to put in the case and for me it was a very easy decision to make.
    I think your gonna like it when it gets to North Carolina next week Phil.

    Sony DSC-S600 camera, Otterbox 3000 case modified in 3D camo, SnapshotSniper SSII control board with the High Performance Wide Angle fresnel and dual D battery holder wired to the camera to get you the battery life needed between card checks.



  2. #2
    Join Date
    Jan 2012
    Location
    NC
    Posts
    1,632
    How do I strap it to the tree??
    2014 HOYT CARBON SPYDER TURBO.....
    Hoyt QAD REST, AXCEL ARMOURTECH 5 pin sight.
    Easton FMJ INJEXION 400s
    Rage "HYPODERMIC" DEEP SIX 100gr.

  3. #3
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254
    There is a tube molded thru the case Phil and it is designed so a Masterlock Python 5/16" cable can be threaded thru the tube for mounting purposes and also to keep the case from being opened. About as theft proof as it can be the way it is designed but like everything else if someone wants it bad enough they will find a way.
    This is just an example showing the cable most of us use, shop around as prices vary as well as size. 5/16" and smaller diameter will fit, anything larger will not.
    http://www.amazon.com/Master-Lock-84...ref=pd_cp_hi_0

  4. #4
    Join Date
    Aug 2010
    Location
    Charleston SC
    Posts
    780
    Nice build Don, he's gonna enjoy the great pics he'll get with the S600.

  5. #5
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254
    I'm sure he will Owen, not a trailcamera out there that can top the picture quality of a homebrew with a Sony S600 in the case. And we both know that's it's not just an opinion, it's a fact.




  6. #6
    Join Date
    Aug 2006
    Location
    NY woods
    Posts
    3,094
    Super build!
    ~2011 Elite Hunter RT AP 25" DL, 52/53 lb, QAD HDX, CJ Mark I, Beman ICS Hunter 500s~
    ~2013 Elite Hunter Black Riser/Snow Camo Limbs 25.5" DL, 50lb-ish , VT Limbdriver Pro, Black Gold Widowmaker, GT Velocity XT 500s~
    ~Trails Cams: P32, P41, S40, SpyPoint IR5~

  7. #7
    Join Date
    Apr 2003
    Location
    howard, Pa
    Posts
    5,926
    Hard to beat a Sony S600 pictures. Nice build.

  8. #8
    Join Date
    Dec 2011
    Location
    Upper Michigan
    Posts
    452
    I've got four of Don's builds out in the bush right now and there's not a better day during the summer than checking those cards....just outstanding photos!

  9. #9
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254
    Appreciated the comments all, easily my favorite camera to put in a build. The bears seem to like the builds too, Jeff knows that from first hand experience....

  10. #10
    Join Date
    Dec 2011
    Location
    Upper Michigan
    Posts
    452
    Don't jinx me, Don.....I've got three of them out in bear country right now and just hoping they lost their taste for fresnals! Card check coming up in two weeks....can't wait!

  11. #11
    Join Date
    Jan 2012
    Location
    NC
    Posts
    1,632

    New build for one of our members

    It is out now and I am
    Stoked about checking it in about 1.5-2 weeks SUPER SIMPLE SET UP!!
    2014 HOYT CARBON SPYDER TURBO.....
    Hoyt QAD REST, AXCEL ARMOURTECH 5 pin sight.
    Easton FMJ INJEXION 400s
    Rage "HYPODERMIC" DEEP SIX 100gr.

  12. #12
    Join Date
    Dec 2010
    Location
    Dallas, Ga (land of the cull bucks)
    Posts
    18,181
    Nice build

  13. #13
    Join Date
    Mar 2014
    Location
    Georgia
    Posts
    198
    what does one of these cost?

  14. #14
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254
    Quote Originally Posted by rawd View Post
    what does one of these cost?

    Varies by the camera used and the person doing the build more than anything else. Feel free to send a pm if you wish and we can go over some of your options.

  15. #15
    Join Date
    Jan 2005
    Location
    Eastern Iowa
    Posts
    28,607
    Nice.
    If it looks like crap, smells like crap, tastes like crap, lies like crap; it’s more than likely a politician from Illinois.

  16. #16
    Join Date
    Dec 2003
    Location
    south central,PA.
    Posts
    1,696
    cant go wrong with one of don's units!!!
    Athens Archery Field Staff
    Athens Accomplice 34

  17. #17
    Join Date
    Feb 2009
    Location
    woodstock,GA
    Posts
    1,323
    Good looking build Don, as is all your stuff!!! I'm sure he will be very happy with it.
    PSE x-force SS Truglo sight NAP Apache rest beman ics hunter Ramcat and Gravedigger broadheads

  18. #18
    Join Date
    Mar 2006
    Location
    Central Michigan
    Posts
    2,254
    Thanks guys, all of the Sonys do a great job for me and the S600 does it best of all.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •