July 13th, 2014, 12:00 PM
What fletching orientation to you guys find works best for shooting fixed blade heads?
Gonna re-fletch my arrows in some SK-300's most likely.
July 13th, 2014, 05:44 PM
I use AZ's Bolt fletcher which throws on a mean helical for fixed blade heads.....using Blazer and Nitro vanes.
Super Small Recurve Crossbows - The Future of Recurve Hunting Crossbows
ZEISS- A CLASS BEYOND GLASS
July 13th, 2014, 06:15 PM
I was using the SK-300's on my BEE's but switched to the VaneTec V-Max due to the SK's wanting to "wrinkle" too much...I use a Bitz and 2-3 degree off-set and there's was very little difference in the accuracy and POI of the two vanes....
The Holy scriptures which are able to make thee wise unto salvation through faith which is in Christ Jesus
TenPoint Turbo XLT II
430 gr Black Eagle Executioners
100 gr Slick Trick Magnums
July 13th, 2014, 07:09 PM
I use a blitz with a very slight rt offset straight clamp. I've tried a bunch of vanes blazers are just about as good as it gets. IMO.
I'm shooting slick trick grizztricks a pretty big fixed head. IMO it has more to do with arrow make up proper spine and spine marked arrows and FOC. Than fletching
Just a down to earth Bowhunter.