Results 1 to 5 of 5

Thread: Timing dots don't line up but draw stops do??

  1. #1
    Join Date
    Nov 2005
    Location
    Southern Michigan
    Posts
    1,827

    Timing dots don't line up but draw stops do??

    On my GT500 the draw stops are hitting perfectly and are set all the way back, but the draw timing dots are off by one. At full draw the cams are in different positions. Is this normal? I'm getting great arrow flight and bulletholes through paper but it seems like the cams should be in the exact same position if it's timed correctly.

    Last edited by Ridgerunner7; August 25th, 2014 at 05:17 PM. Reason: wrong info


  2. #2
    Yup set cam's the same . Then set draw stop's . Good luck .

  3. #3
    Join Date
    Jan 2013
    Location
    East Tn
    Posts
    227
    Have you read the sticky in this sub forum yet?
    '12 Answer 60#/29.5"AP-Stokerized/QAD HDX/SwordTwilight/TreeLimb/GT 5575 Pro/Magnus125grn

  4. #4
    Join Date
    Nov 2005
    Location
    Southern Michigan
    Posts
    1,827
    Yes the issue was I had the draw stops set all the way back and could not get the timing dots synchronized. I found out what the problem was though. I had lost a limb stop and Elite sent me one. The new stop was actually slightly bigger in size so it was throwing everything off a little.

  5. #5
    Join Date
    Jan 2013
    Location
    East Tn
    Posts
    227
    I wouldn't have thought about that, glad you got it worked out

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •