August 25th, 2014, 06:09 PM
Timing dots don't line up but draw stops do??
On my GT500 the draw stops are hitting perfectly and are set all the way back, but the draw timing dots are off by one. At full draw the cams are in different positions. Is this normal? I'm getting great arrow flight and bulletholes through paper but it seems like the cams should be in the exact same position if it's timed correctly.
Last edited by Ridgerunner7; August 25th, 2014 at 06:17 PM.
Reason: wrong info
August 27th, 2014, 09:22 PM
Yup set cam's the same . Then set draw stop's . Good luck .
August 28th, 2014, 01:04 AM
Have you read the sticky in this sub forum yet?
'12 Answer 60#/29.5"AP-Stokerized/QAD HDX/SwordTwilight/TreeLimb/GT 5575 Pro/Magnus125grn
August 28th, 2014, 08:02 PM
Yes the issue was I had the draw stops set all the way back and could not get the timing dots synchronized. I found out what the problem was though. I had lost a limb stop and Elite sent me one. The new stop was actually slightly bigger in size so it was throwing everything off a little.
August 29th, 2014, 06:54 AM
I wouldn't have thought about that, glad you got it worked out