I've decide to retune my 2012 LF fdue to to the fact that my center shot was a little to far out for my taste 1" although it did shoot really well (yes I know "how stupid") but I'm bored and have the time.
So here is my starting point after moving the center shot to 13/16 and .220 shims on the string side and .195 on the cable side.
So having a nock right condition I put
.230 shims on the string side and .185 on the cable side pushing the cam further to the right. Here is where I'm at shooting bareshafts at 15yds.
Should I add another .010 to the string side or call it good? The bottom group is a shot that didn't feel very well so ignore it. Also assume my DL and grip are good. Thank you for your time.
Sent from my SAMSUNG-SM-G935A using Tapatalk
So here is my starting point after moving the center shot to 13/16 and .220 shims on the string side and .195 on the cable side.
So having a nock right condition I put
.230 shims on the string side and .185 on the cable side pushing the cam further to the right. Here is where I'm at shooting bareshafts at 15yds.
Should I add another .010 to the string side or call it good? The bottom group is a shot that didn't feel very well so ignore it. Also assume my DL and grip are good. Thank you for your time.
Sent from my SAMSUNG-SM-G935A using Tapatalk