If you have some tools, a little shop skill and the interest, this upgrade to your CenterPoint Sniper 370 will reduce trigger travel at least 50%.
The bracket to allow for sear adjustment gets installed and a small change (.020 to .030) to the pin top length will greatly improve the Sniper's long trigger pull.
Bracket and Pin.JPG
The trigger assembly needs to be removed and a 10/32 X 1" screw hole is added to secure the small bracket.
Here is the detail for the bracket:
A trigger pressure modification is in the works as well which will change the stock 5-6 lb pull to 3-4 lb pull.
If you want to know more about the trigger upgrade watch the Forum or feel free to contact me.
Normal disclaimers apply: This change affects warranty and any change to the xbow design is done at your own risk. Small children and pregnant women should refrain from attempting this.....