January 1st, 2008, 02:04 PM
Arrow length for 30 inch draw?
Just got a 30" draw Apex 7. What length should my arrows be?
60lb draw weight.
Thanks for your help
January 1st, 2008, 02:34 PM
I was researching this issue today. What I found is that arrow length is measured from the bottom of the valley on the nock to the furthest point the arrow touches your rest plus at least an inch. It maybe more depending on your rest and the broadheads you are using. Don't want to slice your fingers.
As a result, there is no real way of telling you just how long the arrow has to be without knowing the setup you have. All of the websites I have looked at suggest taking a full length arrow and drawing it back while having someone measure the one inch point beyond the rest. Remember to account for the blades if this is going to be a hunting arrow.
Here is a good link: http://www.martinarchery.com/easton/targinfo.html
Hope this helps.
January 4th, 2008, 10:27 AM
use a full length arrow and give a sharpie or a small piece of tape to a friend. Be careful! Have them mark the arrow somewhere near the middle of your shelf then measure the marked arrow.
January 4th, 2008, 03:11 PM
I'am a 30" draw and my FatBoy 400's are cut to 28 1/4" from bushing to end of bare shaft.
2007 Mathews Drenalin, HHA OL-5000 Sights, GK Premier Rest , Easton X7 Eclipse, "Doinker Stabilizers", TRU-BALL ST-360
2011 PSE D.S. "EVO", NAP Apache Rest, SpotHogg RealDeal Sights, Victory V-Force Arrows, Doinker Stabilizer, Tru-Ball ST-360.
(T.R.U. BALL Staff)(BOHNING Staff)(BLING SLINGS Staff)
By crewpsu in forum General Archery Discussion
Last Post: March 28th, 2010, 06:30 AM
By jonston18 in forum Bow Tuning
Last Post: February 6th, 2009, 03:34 PM
By bchannell in forum Arrows & Strings
Last Post: May 30th, 2008, 03:46 PM
By tack32 in forum General Archery Discussion
Last Post: August 29th, 2003, 07:12 PM