a href="http://www.lancasterarchery.com/archery-classic-register/#header">
Page 1 of 2 12 LastLast
Results 1 to 25 of 27

Thread: Hoyt Enticer Carbonite (1996)

  1. #1
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Talking Hoyt Enticer Carbonite (1996)

    I have a 1996 Hoyt Enticer target bow that I bought in April of 1996. I have taken excellent care of it, and it was shot it in FITA competitions. It has been stored in an airline approved case and kept up on all required maintenance. It has BCY 450 plus strings and cables. It was a great bow, however I no longer shoot target archery and would like to see it go to a good home. It is a great outdoor bow, as it has shot many X's at 90 Meters! It would also be an excellent 3-D bow. Listed below are the specs of the bow, as well as a couple of pictures. I have the original receipt and manual, it was purchased new for $590.
    1996 Hoyt Enticer - Machined Aluminum Riser - Anodized Teal Color
    Carbonite Limbs (split limb design)
    Command Cams (C3)
    Draw Weight Range - (50-60 lbs.)
    60% Letoff
    Estimated Mass = 4 lbs.
    38" Axle to Axle
    7.25" Brace Height
    53.5" String Length
    34.5" Cable Length
    5 Grains per pound speed @ 70 lb. weight @ 30" draw length = (299-305 ft. per second)
    9 Grains per pound speed @ 70 lb. weight @ 30" draw length = (230-236 ft. per second)

    Asking $200.00 or best offer

    Attached Images Attached Images


  2. #2
    Join Date
    Jan 2008
    Location
    aussie
    Posts
    592
    looking damn god after 12 years

  3. #3
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Talking

    Lol, thanks unfortunately It hasn't been shot much lately, that is why I'm looking to find a good home for it. I forgot to mention that it is currently set up at 28" draw length with 1/2" increments in the cam. I will look when I get home from work to list the full draw length range it can go.

  4. #4
    Join Date
    Oct 2006
    Location
    Missouri, USA
    Posts
    1,360

    Free bump...

    Bump for a sweet rig....
    ______________________________ _

    St. Louis Archery Club - St. Louis, Missouri

    "...the most important shot....the one on your fingers...."

  5. #5
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Wink

    I checked the Hoyt website and according to their charts, I have a C3 base cam and the module is in the "3" position, which is at 28". The range is from 26" to 31", in case anyone is interested, lol.
    Attached Images Attached Images
    Last edited by RNC23; September 11th, 2008 at 07:07 PM. Reason: Mis-typed

  6. #6
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  7. #7
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    Sale pending to RossMan37

  8. #8
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    Sale fell through, I'm re-posting. This is a great bow for a decent price. Feel free to let me know if you have any questions.

  9. #9
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Talking

    I received an update from Smarcher today that was very helpful. This bow was originally purchased with Master Cams and around 2001 I purchased new Command Cams. Smarcher pointed out that the cams that I purchased are a newer version from the Command Cams that were available when the bow was originally purchased.

    The newer style Command Cams that are on the bow are 65% letoff, and are currently set up at 28" draw. Each hole has 1/2" increments, therefore the draw length range is 27" to 30.5".

    Anyway, please dis-regard the previous chart because it is in reference to the older style Command Cams.

    Thanks again Smarcher for the helpful info!

  10. #10
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  11. #11
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    Make me an offer I can't refuse...

  12. #12
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    bump...

  13. #13
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  14. #14
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    Come on guys... make an offer, someone needs a good Christmas gift!

  15. #15
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Wink

    Bump...

  16. #16
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    bump

  17. #17
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    yet another bump...

  18. #18
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    $175 TYD obo...

  19. #19
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  20. #20
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  21. #21
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  22. #22
    Join Date
    Dec 2006
    Location
    Braham,MN
    Posts
    1,529
    If funds wernt so tight-I can't believe someone hasn't bought this!
    ProString Archery
    Premium custom and replacement strings and cables

  23. #23
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Red face

    Yes I know, times are tough for all of us. Hopefully someone can find a good home for it!

  24. #24
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49
    ttt

  25. #25
    Join Date
    Aug 2006
    Location
    Marysville, MI
    Posts
    49

    Wink

    Sale pending...

Page 1 of 2 12 LastLast

Similar Threads

  1. Hoyt Enticer Carbonite XL
    By pyroman_27 in forum Hunting Bows
    Replies: 7
    Last Post: March 15th, 2010, 03:49 PM
  2. 1996 Hoyt Enticer Supreme
    By WPlainsDrifter in forum Hunting Bows
    Replies: 1
    Last Post: February 23rd, 2010, 03:32 PM
  3. Hoyt Carbonite Enticer
    By Kendall Archery in forum Target Bows
    Replies: 6
    Last Post: January 27th, 2009, 07:28 PM
  4. 1996 Hoyt Enticer string length
    By Josh_Putman in forum Bow Tuning
    Replies: 2
    Last Post: September 22nd, 2006, 09:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •