a href="http://www.lancasterarchery.com/archery-classic-register/#header">
Results 1 to 9 of 9

Thread: peep angle help

  1. #1

    peep angle help

    I want to install a specialty peep on my bow and I don't know if I need to go with the 37 degree angle or the 45 degree angle.

    I have a Hoyt Ultra elite with 2000 limbs and a 31 inch draw length. The ATA on the bow is about 37 1/2" if that helps.

    I am hoping that someone has a setup that is close and can tell me witch one to get.

    Thanks.

  2. #2
    Join Date
    Mar 2009
    Location
    Lee,Ma
    Posts
    564
    I shoot the same bow at 29.5" using 37 degree peep. Peep works great.

  3. #3
    Join Date
    Jun 2006
    Location
    LOOK BEHIND YOU!
    Posts
    2,519
    Go to specialty archerys website there is a graph that will tell you which peep for which ATA bow length.
    Repeat your process,Concentrate then follow through!

  4. #4
    Thanks for the help!

  5. #5
    Hi!
    37 degrees is for Bows under 40"ATA
    45 degrees is for Bows over 40" ATA

    Hope this helps!
    Hoyt Vantage Elite Plus/ CX Nano Pro
    Sponsored by Swarovski Optik http://http://www.swarovskioptik.com/en/home

  6. #6
    Join Date
    Apr 2012
    Location
    WA state
    Posts
    588
    What about a 40" bow with a 30.5" draw length???

    -Dan in WA
    (and no, I'm not a bowhunter)


  7. #7
    Join Date
    Dec 2011
    Location
    midwest
    Posts
    1,511
    bow ata is not the true length for what peep to use, the size of the wheel makes a difference also. a 40 inch bow should be 45 degress.but if its only a 25-27 inch draw on a 40 inch ata use 37 degrees.the chart may help some to. look at an elite 35 has big wheels 30 inch draw, then i would go with a 45 degree. i hunt with hoyt 737 it has a 37 inch ata but wheels are big my draw length is 29 inch with the #4 cam and half so i use a 45 degree peep.there are always exceptions. now back to the top question my advise would be 45 degree peep,but i would bet you could use both angles.good luck

  8. #8
    Join Date
    Jun 2012
    Location
    Houston (not many know Katy)
    Posts
    9,216
    Quote Originally Posted by DIV View Post
    What about a 40" bow with a 30.5" draw length???
    get a 45*
    USA Level 2 Instructor
    2012 PSE Supra ME, 47#,ACC, Davis sight;2012 Dominator Pro 3D 55#; DS Advantage; ACC's
    Win-Win Inno Carbon Riser/Tropics 36#(38 tof), Redline arrows 690- DS Advantage-282grn@ 195fps
    2010 Hoyt Vantage Pro, XT 2000, Sprls, Sure Loc W BE 6X, ACC's 408g @ 259

  9. #9
    Join Date
    Apr 2012
    Location
    WA state
    Posts
    588
    I did get the 45 for my new (to me) Conquest pro which has 40-5/8" ATA and the peep is lining up just right.
    -Dan in WA
    (and no, I'm not a bowhunter)

Similar Threads

  1. Peep Angle?
    By speedfreak in forum General Archery Discussion
    Replies: 6
    Last Post: December 11th, 2007, 11:36 AM
  2. Peep angle ???
    By OA3D in forum Bow Tuning
    Replies: 5
    Last Post: September 20th, 2007, 03:56 PM
  3. Peep Angle
    By J_Buck in forum General Archery Discussion
    Replies: 10
    Last Post: February 6th, 2007, 11:28 PM
  4. Peep Angle
    By Young Jedi in forum General Archery Discussion
    Replies: 4
    Last Post: July 7th, 2005, 05:37 PM
  5. Peep Angle
    By Plainsman in forum General Archery Discussion
    Replies: 0
    Last Post: October 4th, 2003, 03:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •