August 14th, 2009, 05:27 PM
Bowtech General String Suppressor Problems
I just picked up a New Bowtech General on here. I have been having problems with the factory string suppressor. Everyfew shots the string seems to stay inside the rubber stopper or pull the rubber stopper back with it. I keep having to keep putting the stopper back on as it often comes out of the string stopper. Also I believe that it is twisting my D- loop.
Will replacing it with the bowjax aftermarket rubber fix this or is there a simple way to stop my string from getting stuck and pulling the rubber out?
August 14th, 2009, 05:28 PM
Super glue that thing in there? :P
2008 Bowtech General
All limbs split eventually
August 14th, 2009, 05:31 PM
when they frist came out with this concept the had a softer rubber pice in there, and i had the same problem, so i got the bow jax.
August 14th, 2009, 05:33 PM
Make sure the string is not hitting the dead center of the stopper. Ideally it should hit about 1/8" to the left of center. Just adjust the j-arm by swiveling it up or down. Also, there should be 2 rubber "balls", one on each side of the holder, to keep it locked into place.
August 14th, 2009, 05:36 PM
Ya I think it's hitting dead center cause the string is sometimes stuck deep in the stopper. Even though the rubber balls are there it still is pulling them out.
Originally Posted by MassDriver
August 14th, 2009, 09:51 PM
Well I did the adjustment and it isn't sticking anymore but it seems to be puttin a lot of stress on the rubber ball on the left side. I can see where it is starting to tear. Looks like the rubber is way to soft. Ordered a Bowjax so hopefully that solves the issue.
August 14th, 2009, 10:10 PM
Wearing out the left side of the supressor. Centered at rest ???
Stable full of Hoyt Bows... Home of the White Alpha Triad !! (Alpha Elite, AlphaBurner, Alphamax 35)
Spot On Bowstrings, Fuse Carbon Blades, Doinker Stabilizers (Doink On), Axcel Sights, AAE, Scott, Bow Rattler
Viper Sights, NAP Rests, Easton & Beman Shafts, Limbsavers, Tru-Ball.
August 14th, 2009, 10:34 PM
Get the bowjax stopper. I stopped having the same problems with my General when I put one on. I think it even made the bow quieter. I bought 2 over a year ago and have not needed to replace the first one yet after 3-4000 shots.
August 14th, 2009, 10:52 PM
Well as per the other post I moved the suppresor so the string was 1/8 of an inch to the left of center. Stopped it from getting stuck but putting some pull on the left side of the rubber.
Originally Posted by Hoythunter01
August 27th, 2009, 11:08 PM
Does anyone sell them in Michigan ?? or where can I get one online ?? Thx
August 27th, 2009, 11:18 PM
2013 Bowtech Experience
2007 Bowtech Commander.
By SEII in forum General Archery Discussion
Last Post: October 8th, 2012, 09:07 AM
By timmymac24 in forum Misc. Items Only Want to buy or trade? WTB or WTT. Please use new item specific forums
Last Post: February 17th, 2010, 12:20 PM
By bowhunter1977 in forum General Archery Discussion
Last Post: August 13th, 2009, 11:24 AM
By Speedy188 in forum General Archery Discussion
Last Post: February 26th, 2009, 10:47 AM
By psevenom2004 in forum General Archery Discussion
Last Post: May 30th, 2007, 09:14 AM