What’s everyone’s choice for prime bows? I have a trinity on my nexus 4. Anyone running a qad? Any issues with it if you are?
Rest choice for prime bows
wraith69
1 - 18 of 18 Posts
Went to the Epsilon on my N4. Way more clearance. My Trinity was SUPER tight with the cables...
Joined
·
4,211 Posts
I’m debating on picking up a epsilon because I prefer the click adjustment on the micro adjust so I know exactly how far I move it when I move it
Joined
·
19,442 Posts
Are you shooting a stiff spine? I prefer cable driven but have been hearing guys are having problems getting rid of a nock low tear with cable driven rests and going with Hamskea. I just picked up a Inline 5 and want to use a QAD HDX or my AAE Prophecy.
Joined
·
4,152 Posts
I have both bows tuned with 400 spine Victory Rips at 27" with a 60 grain insert 125 grain head and 63# draw weight. Both have good tears through paper and at 20 yards with a bare shaft. I will be bumping up to a 350 spine after turkey season not because I have to, I just prefer a stiffer spine.
Joined
·
368 Posts
QAD on my Rize and my Centergy. No mechanical issues with the rest or tuning problems.
Joined
·
6,093 Posts
I have an AAE ProDrop on my Inline 3 and a Trophy Ridge V-Max on my Nexus 2.
I do not think you will be disappointed. I'm sure not.
Joined
·
6,139 Posts
Hamskea trinity pro target on my centergy
Joined
·
4,870 Posts
Late to the topic, but Hamskea Trinity pro on the inline 3. Older bracket with longer slot in riser bracket. Fits perfect, both Berger bolts in, keeps it level and keeps from moving without using the set screws. Hate using the set screws and never do. Waiting for a longer slot bracket from them to put same rest on nexus. Original bracket create clearance issues with cables and only allows one bolt.
Joined
·
4,475 Posts
Ripcord max is what I am using on my inline 5 and will use on the revex 4
Joined
·
1,058 Posts
For others as well: You could consider this bracket to run an integrated rest
QAD Integrate Rest Adapter
This kit includes everything you need to use the QAD IMX Arrow Rest on any bow that’s riser is not cut with a dovetail. The kit includes all of the mounting hardware you will need. You will need to measure your riser thickness at the Berger Hole to determine which adapter you need. The narrow...
Joined
·
4,211 Posts
See I thought of that but you still have to mount the mount which has to be leveled and there’s really no difference at that point than mounting a standard restFor others as well: You could consider this bracket to run an integrated rest
[/QAD Integrate Rest Adapter
This kit includes everything you need to use the QAD IMX Arrow Rest on any bow that’s riser is not cut with a dovetail. The kit includes all of the mounting hardware you will need. You will need to measure your riser thickness at the Berger Hole to determine which adapter you need. The narrow...lancasterarchery.com
Joined
·
1,058 Posts
Are prime risers not square in the shelf area? I would assume you would just butt it up to the square riser and tighten it down and it would basically level itself: square side of riser against squared side of rest mount. 🤷🏻♂️
Joined
·
6,093 Posts
They are...and you can. Do it all the time with Hamskea Epsilons.
Joined
·
1,058 Posts
Thanks for clarifying that! I haven’t actually seen that QAD bracket in person but I would assume it’s square as well and probably what I would run. Good chance I’ll end up with a Revex!
1 - 18 of 18 Posts
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
