1 dozen Easton Axis 340 match grade for sale that are cut 27" ctc. They have 75g brass HIT inserts installed. With 100g point weight, total weight is 465 grains. 3 of 12 are bare shaft and were used as practice arrows. The other 9 fletched arrows are in perfect shape, 6 were in a quiver and 3...

I’ve seen various posts that somewhat discuss this but am curious as to what hunters more knowledgeable than myself think. I am currently shooting axis 5mm 340’s with standard HIT inserts and 100gr heads cut to 28.25”. (Bow is Hoyt RX-3 28.5DL 70#) I am wanting to increase overall weight and FOC...

Recently I decided to throw my wallet at my computer, and what came out of it was two dozen X10 Protours (340 spine). At 70# draw weight and 30" draw length, I messed around with configurations on Archers Advantage til I found a build that would work for my setup. I shoot (relatively) heavier...

I have 9 Easton Axis Shafts. They have been cut but never fletched, I have the inserts. They are 28" Carbon to Carbon, please see pics. Come with nocks and inserts. Check my feedback....81 tyd....Paypal only, usa only.......

(5) Gold Tip kinetic pierce 340’s. Measure 28 & 1/8” from nock groove to end of carbon. 29” from nock groove to the end of outsert. They need new fletchings but the shafts are in good shape. $45 tyd.

I have 6+1 bonus easton axis 340 arrows, for sale. 26. 5/8" carbon to carbon. no field points, glued inside inserts, nocks on 6, fletched with blazers. $45 shipped, OBO

Hey all, wanted some insight before I made the purchase on a dozen Axis arrows. I have a 27.5" draw with 60lbs of DW. Running 26" arrows with a lighted nock (20 gr) in the rear. What spine would I need with a standard insert at 16 grains and which would I need with 50 gr of brass up front...

Have a decent d340 with 60lb barnsdale limbs. Has a apex drop away, octane stabilizer, and trophy ridge sight. I’m looking for $450 plus shipping. That’s pretty well where I’m at. All it needs is a quiver to go hunting I may have one if you need one I’d have to look. Does have some finish wear...

I bought some new FMJ and they are an inch longer then my old FMJ, I'm already on the line between 340s and 400s so I'm trying to get them cut as short as possible to make them that much stiffer. I'm wondering if I can cut off an 1" at the "nock end". Thanks for any input or advice!

6MM AXIS UNDER ARMOUR SHAFTS 340 WITH NOCKS AND INSERTS. brand new. full length with bag of inserts. $85 tyd.

Looking for a set of bowtech destroyer limbs, 340 or 350 preferably 65lbs or under but would look at any limbs at this point. No color preference. Let me know what you have.

14 Easton FMJ 340s (most have not been shot), 11.3 GPI, 27 3/4" from carbon to throat of nock, fletched with Blazers at 3 degree helical, inserts epoxied in. $110 TYD. PM for more info. Thanks.

18 Beman ICS Hunter Elite Arrows, 340 Spine, 3 -4" white fletches, slightly used, 27 1/2" from saddle of nock to end of shaft $100 Shipped lower 48

16 Beman ICS Hunter Elite Arrows 340 spine, 3 - 4" white fletches, 27 1/2" from saddle of nock to end of shaft Slightly Used $90 Shipped lower 48

Practically new arrows. I shot each of them a handful of times only to find they are too stiff for my bow. No cracks. They are cut to 28" from nock groove to end of shaft, but the ballistic collar overlaps about 1/2".. I will include 6 aluminum penetrator inserts for free. Fletched with 2"...

12 Easton Fatboy 340 with blazer vanes. They are cut 29" from end of arrow to nock throat or 29.5" from end of point to nock throat. They have Easton 100 grain glue in points. 1 was shot about 5 times into a bag target, the other 11 have never been shot. I bought them to shoot 3D this year but I...

Im going with a stiffer spine arrow and need to offload these ASAP! my loss your gain I have the 120 grain glue in field points and pin nocks all dozen are in great shape and have the spine indexed. there are 3 arrows that will need new vanes other than that they are perfect. the measurement of...

Im selling 24 Gold Tip Pro Hunters. all cut at 28" carbon to carbon. 11 are brand new never shot or fletched, 13 have been fletched with a Camo/Red,White,Blue wrap and Red White blue vanes. The ones I fletched I shot for about a week or so, they look brand new. by the nock it does say my last...

Have a different setup and need a stiffer arrow, so selling these. $55 tyd (cont. U.S.) OR Trade for some Axis nfused 340's. Details: 6 (half dozen) Easton Axis 400 nfused 9.0 gpi Blazer Vanes (green and white) HIT Inserts Field tips (the correct diameter) 27" from throat of nock to end of...

k - let's try this, I think I have all my numbers calculated and could use a stiffer arrow. Want to trade my 6 (half dozen) Easton Axis 400 nfused arrows for your Easton Axis 340 nfused arrows. Here's details on what you'd be trading for: 6 (half dozen) Easton Axis 400 nfused 9.0gpi Blazer...